Welche ist die Top 5 Bitcoin Mining Hardware 2019/2020

"FACT: 31 Jan 2013. The first bitcoin mining ASIC hardware from Avalon performed at 67.5 GH/s. It was delivered to Bitcoin developer jgarzik"

submitted by Egon_1 to btc [link] [comments]

"FACT: 31 Jan 2013. The first bitcoin mining ASIC hardware from Avalon performed at 67.5 GH/s. It was delivered to Bitcoin developer jgarzik"

submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Mining and Dogecoin - Some FAQs

Hey shibes,
I see a lot of posts about mining lately and questions about the core wallet and how to mine with it, so here are some facts!
Feel free to add information to that thread or correct me if I did any mistake.

You downloaded the core wallet

Great! After a decade it probably synced and now you are wondering how to get coins? Bad news: You don't get coins by running your wallet, even running it as a full node. Check what a full node is here.
Maybe you thought so, because you saw a very old screenshot of a wallet, like this (Version 1.2). This version had a "Dig" tab where you can enter your mining configuration. The current version doesn't have this anymore, probably because it doesn't make sense anymore.

You downloaded a GPU/CPU miner

Nice! You did it, even your antivirus system probably went postal and you started covering all your webcams... But here is the bad news again: Since people are using ASIC miners, you just can't compete with your CPU hardware anymore. Even with your more advanced GPU you will have a hard time. The hashrate is too high for a desktop PC to compete with them. The blocks should be mined every 1 minute (or so) and that's causing the difficulty to go up - and we are out... So definitly check what is your hashrate while you are mining, you would need about 1.5 MH/s to make 1 Doge in 24 hours!

Mining Doge

Let us start with a quote:
"Dogecoin Core 1.8 introduces AuxPoW from block 371,337. AuxPoW is a technology which enables miners to submit work done while mining other coins, as work on the Dogecoin block chain."
- langerhans
What does this mean? You could waste your hashrate only on the Dogecoin chain, probably find never a block, but when, you only receive about 10.000 Dogecoins, currently worth about $25. Or you could apply your hashrate to LTC and Doge (and probably even more) at the same time. Your change of solving the block (finding the nonce) is your hashrate divided by the hashrat in sum - and this is about the same for Doge and LTC. This means you will always want to submit your work to all chains available!

Mining solo versus pool

So let's face it - mining solo won't get you anywhere, so let's mine on a pool! If you have a really bad Hashrate, please consider that: Often you need about $1 or $2 worth of crypto to receive a payout (without fees). This means, you have to get there. With 100 MH/s on prohashing, it takes about 6 days, running 24/7 to get to that threshold. Now you can do the math... 1 MH/s = 1000 KH/s, if you are below 1 MH/s, you probably won't have fun.

Buying an ASIC

You found an old BTC USB-miner with 24 GH/s (1 GH/s = 1000 MH/s) for $80 bucks - next stop lambo!? Sorry, bad news again, this hashrate is for SHA-256! If you want to mine LTC/Doge you will need a miner using scrypt with quite lower numbers on the hashrate per second, so don't fall for that. Often when you have a big miner (= also loud), you get more Hashrate per $ spent on the miner, but most will still run on a operational loss, because the electricity is too expensive and the miners will be outdated soon again. Leading me to my next point...

Making profit

You won't make money running your miner. Just do the math: What if you would have bougth a miner 1 year ago? Substract costs for electricity and then compare to: What if you just have bought coins. In most cases you would have a greater profit by just buying coins, maybe even with a "stable" coin like Doges.

Cloud Mining

Okay, this was a lot of text and you are still on the hook? Maybe you are desperated enough to invest in some cloud mining contract... But this isn't a good idea either, because most of such contracts are scams based on a ponzi scheme. You often can spot them easy, because they guarantee way to high profits, or they fake payouts that never happened, etc.
Just a thought: If someone in a subway says to you: Give me $1 and lets meet in one year, right here and I give you $54,211,841, you wouldn't trust him and if some mining contract says they will give you 5% a day it is basically the same.
Also rember the merged mining part. Nobody would offer you to mine Doges, they would offer you to buy a hashrate for scrypt that will apply on multiple chains.

Alternative coins

Maybe try to mine a coin where you don't have ASICs yet, like Monero and exchange them to Doge. If somebody already tried this - feel free to add your thoughts!

Folding at Home (Doge)

Some people say folding at home (FAH - https://www.dogecoinfah.com/) still the best. I just installed the tool and it says I would make 69.852 points a day, running on medium power what equates to 8 Doges. It is easy, it was fun, but it isn't much.
Thanks for reading
_nformant
submitted by _nformant to dogecoin [link] [comments]

Zigmabit fastest and most efficient crypto miners 🔴 SCAM 🔴

Zigmabit fastest and most efficient crypto miners 🔴 SCAM 🔴
https://preview.redd.it/wk4gh9rm3cb41.jpg?width=1280&format=pjpg&auto=webp&s=db173c6ddb6d51581b6e1f638c0a0465df8f5020
We are not even in a bull market yet. Usually these things happen when there is a lot of hype. ZigmaBit is scammer company with fake mining rigs to basically scam you. Their selling website is https://zigmabit.com/ , please don't even click the link. We do not want to give them any traffic, just watch the video down below.
They have listed 3 miners on their website:
  • ZigBit 2.0
  • ZigBit 3.0
  • ZigBit 5.0

https://preview.redd.it/406xtn2l3cb41.jpg?width=1676&format=pjpg&auto=webp&s=4933fa05a303be6ece49fa37c4e8845fa8636605
Which of course doesn't exist. They recommend that these miners will make some crazy gains, which of course will not happen. As these miners are fake. Seeing the specification makes me think these guys know very little about crypto currency mining. So for example the specification they are advertising on ZigBit 5.0 is :
  • Bitcoin-2000 TH/s
  • Litecoin-300 GH/s
  • Ethereum-75 GH/s
  • Dash-50 TH/s
  • Power Consumption-2400W
  • Power Socket 110V-240V
Now you understand what im talking about, seriously 2000 TH/s mining Bitcoin at 2400w (where the latest Antminer S17 is 72Th/s), or mining ETH and the profit is so big that it will cover the miner cost faster then month. And another thing, they using the same hardware to mine multiple currencies which every one of them needs different hardware. Worst thing is that people will loose money, and most likely some of them already did. People think they will get rich after buying this miner, which they will never receive. Their fake products look so bad, their cheapest version ZiBit 2.0 looks like an ATX power supply.

https://preview.redd.it/sj7oslyl3cb41.jpg?width=1606&format=pjpg&auto=webp&s=470d5ceb04049cb3b617eb3fa1294e414def0b90
Few things to also note is :
  • They have support chat on their website. I did send them a message and got response after about 20 minutes. So they told me that they only accept crypto currency, and the products are shipped from United Kingdom. My last line of the chat was "im coming for you you'll be in jail soon ".
  • When you google miner name, there is few websites coming up describing how great is their product. This most likely is owned websites for this scammer or this is purchased content posts.
  • Last thing is that i tired to do checkout on one miner, there is btc address which has already received 7btc. Im not sure if this is some people got already scammed or this is fake volume, hope this is fake volume https://www.blockchain.com/btc/address/1C4RSshoK9veR4jCNStqF32QARS5oGnmzw . Hope none is scammed.
Sad to see that there is such kind of people who makes money on scamming others. Man karma is there , i believe it will come for you sooner or later.
video - https://www.youtube.com/watch?v=j4Bc7\_hNk4o&feature=youtu.be
submitted by mineshop to gpumining [link] [comments]

Obelisk's Sia ASICs - Full Details

https://obelisk.tech
Sia is releasing a 28nm, full-custom ASIC. This ASIC will be a complete package, similar to an antminer. You will receive a mining box that includes chips, power supplies, etc. Minimal setup will be required to get the miner working.
The miner is in early development already. We have begun the process of chip design, hardware design, and supply chain management. We have had conversations with previous ASIC manufacturers, and we have been warned about delays, unexpected costs, and myriads of pitfalls that throw off estimations. For this reason, we have set a conservative shipping date of June 2018. If the miners are ready sooner, they will be shipped sooner. If all goes well (and it rarely does, especially for first time manufacturers), we could see the miners shipping before March 2018.
Following the presale, we will be posting a development roadmap on our website that includes all the major steps of development. We will be crossing off steps in the roadmap as we complete them, which will allow the community to follow our progress, have visibility into delays, and will be able to see the places where we are ahead of or behind schedule.
The estimated hashrate is 100 GH/s. We will not know the exact hashrate until later in the development process, however we have confidence that 100 GH/s is a low bar to hit. We may end up shipping miners with a much higher hashrate, and will continue updating the estimated hashrate as we get more accurate estimates for how the chips will perform. The estimated power draw is 500w, though it may be significantly less.
The price of the unit is going to be $2499. Chip manufacturing is expensive, supply chains are expensive, and there are a lot of single-time costs that go into making miners. Future batches will likely have lower prices, however they will also ship later.
We will be selling the miners for Bitcoin. We expect the sale volume to be very large (in the tens of millions of dollars), and we feared that the Sia cryptocurrency would not have enough liquidity to handle all of that volume, resulting in the price rising quickly as people scramble to buy Siacoin for the ASIC, and then the price falling quickly as we convert the Siacoin to USD. This is the worst of both worlds - participants buy the siacoin at a premium, and then we sell them at a discount. Bitcoin has much, much deeper liquidity, and we can sell large volume of Bitcoin quickly without moving the price too much.
We will be converting the Bitcoin to USD as fast as possible. If the price fluctuates by more than 5% before we are able to convert, we will need to request more coins to cover the difference, or cancel the order. If the price fluctuates upwards by more than 5% before we convert, we will return the difference.
The sale and shipment of ASICs on the Sia network is going to dramatically increase the hashrate. When considering how much revenue you may get from a unit, please take into account the fact that we are selling enough units to potentially 10x or 100x the difficulty. If another ASIC manufacturer decides to start selling Sia ASICs, the hashrate may go up by more than just the number of units we sell. Please also consider that the block reward is decreasing. Today, the block reward is about 189,000 siacoins per block. By June 2018, our ship date, the block reward is going to be closer to 135,000 siacoins per block, decreasing by 1 siacoin per block (or 4320 siacoins per month).
The presale will be open for 7 days. There is no rush - people who buy on the fourth day will receive the same treatment as people who buy on the first day. The sale will not close early, and while we reserve the right to deny purchases, we have chosen not to put a cap on the number of units sold. We may pre-sell additional batches before the first batch ships. The first batch will have priority when we begin shipping, and if the later batches will be shipping shortly after, those later batches will be sold at a higher price. People who buy in on the first batch will receive both price preference and shipping date preference as a reward for taking on the most risk.
Obelisk is the company that will be producing these chips. Obelisk is a fully owned subsidiary of Nebulous Inc. Nebulous is the company that employs all of the Sia core developers.
Obelisk has plans for growth in the future. None of these plans are finalized as we are primarily focusing on shipping this miner, but potential future products include:
Finally, we plan to introduce decentralized mining pools into the Sia ecosystem before we ship the miners. Hosts will have the option of running their own mining pool, and then miners can detect the hosts by checking the blockchain and the peer network, forming payment channel contracts with them and participating in fully decentralized mining. This should help alleviate the pool centralization that is seen in most PoW cryptocurrencies.
We are very excited about our new company, and hope that you share in our excitement. Feel free to ask any questions.
submitted by Taek42 to siacoin [link] [comments]

A 14-year-old's experience with Bitcoin

First-time poster here, don’t bully me, apologies for the potentially atrocious formatting :) TL;DR at the end
So in the wake of Bitcoin’s explosive rise in value and media attention, I’ve been encouraged by others to share my experience over the past few years as a miner. Here's my story (it's kinda long, you've been warned)

Humble Beginnings

It all started almost three years ago in the beginning of 2015 when Bitcoin flew under my radar. Looking into it, I admittedly wasn’t drawn in because of the decentralisation or the anonymous payments, I was hooked on the idea that anyone could get their hands on some just by running a program and leaving it to do its own thing. I know, how shallow of me. But the idea of making even a bit of money without ‘any work’ was convincing enough for 11-year-old me to do more digging into the matter.
To my disappointment, I soon found out that the era of mining Bitcoins with a PC’s CPU or GPU was long obsolete and instead it was all ASICs at that point.
So that summer, for my twelfth birthday, I got a little ASIC machine for €60, an Antminer U3. This little thing took up less space than a graphics card but could mine at 60 GH/s. Because, at the time, I didn’t have a controller device that could be kept up and running all day long so it could run the program that mined Bitcoin using the U3, I went ahead and got a Raspberry Pi. After setting up the Pi and installing all the necessary stuff (took an awfully long time), I connected it to AntPool and plugged the U3 in. Two days past and the mining pool sent the first Bitcoin I ever received to my wallet (I was using Blockchain.info). It was just 30 cents worth of BTC but I felt a bit of a rush because I was earning a bit of money through this completely new thing and the idea of that was thrilling.
Let’s back up for a second. I just used the term ‘earning’ as if I was profiting, and naive me 2 years ago was no different. In reality, I was at first oblivious to the fact that I was most likely LOSING money overall because of how much energy that little sucker was taking in. But, I was comforted thinking that using that machine was just a practical way of learning about this modern currency and that the loss of several cents’ worth of energy was acceptable in the name of education and learning.
Fast forward ten months to the wonderful summer of 2016. I had recently turned 13 and the Antminer U3 had been running on and off throughout. Various pauses and breaks in mining would be observed, as I had to manually get everything up and running after frequent breaks in the Internet connection. You’d expect my newly-turned-teenage brain to lose interest in Bitcoin as it does with many other gimmicks, but – even surprising myself – I miraculously didn’t. Good thing I maintained interest thinking about it now, not so good at the time for my parents. Why do I say this? I felt like it was time to get a little upgrade in my hardware.

Getting an upgrade

Days passed with me comparing every ASIC miner I could at that price point. It was then I set my eyes upon the Antminer S7 (same folks who did my U3, nice). I had put it up against a plethora of other miners and I figured the S7 was my best bet; the thing costs only about 10 times that of my U3 but could run at 4.73 TH/s, almost 80 times as powerful. The only problem being its power consumption was at 1300 watts, which would put a massive dent in the electricity bill and eliminate any profit I would make. Fortunately, I had a secret weapon up my sleeve – or rather my mum did. She had rented out an office outside our apartment where she would keep files and paperwork. The office’s electricity bill was a flat rate as far as I’m aware and it ended up being my saving grace because it virtually got rid of the “oh no I’m actually going to be losing money because of how much electricity I’m eating up” factor, making this whole hardware upgrade viable.
After convincing my parents, they finally agreed to shell out the requested amount, with the initial investment being paid back with time. I went to a local Bitcoin vendor and purchased 1 BTC for about $665 in cash (sigh yes, I know. $665 dollars). Shortly after, I used about 0.9 BTC to purchase the Antminer S7 and a 1600W power supply for a grand total of $600. The products would be made and shipped from China so I was definitely in for a wait.
A month passes and the package arrives at last. I connected all the wires from the power supply into the S7 and – with great anticipation – I plugged it into the wall to start its first ever run. And what do you know? An extremely loud and high-pitched whirring sound blasted out from the fans on both the power supply as well as the S7. After killing the thing, I questioned my choices. I couldn’t dare put that thing anywhere near my mum’s office in the event it drive everyone in the building absolutely nuts. I was at a loss. However, I soon recovered from my temporarily debilitated state and got working on a solution.
The first idea that came to my mind: change the fans. The stocks fans were by Evercool and spun at around 3000 RPM. The power supply used a small, robust fan that looked like a cube that must’ve spun at extremely high speeds judging by how high the sound it produced was. I got my parents to give me some more funding so I could acquire the replacement fans and I did. Bust. After installation and testing, none of the fans would work. I managed to configure the S7 to connect to my Antpool account and the machine would manage mining for several minutes running at peak performance but ultimately be automatically cut off because of how hot the machine was getting (I’m talking about 80 degrees Celsius kinda hot in that thing). The fans got refunded and I was back to the drawing board.
After combing through some forum posts and videos, I came across this video and a forum post in which people have their mining rigs placed inside a ventilated, muffled cabinet. Undertaking a project like this would be time-consuming and risky but I had no better ideas so I decided to go through with the idea anyway.
Firstly, I sought out a cabinet with suitable dimensions. I managed to get just what I needed at a second-hand IKEA shop. Great. Secondly, I went ahead and acquired some sound-absorbing acoustic foam from a local provider. Fantastic. Finally I had to get a ventilation system going within the cabinet, otherwise, all the hot air would roast the machine alive in there in a bloody mess. With the help of my dad, we found a pair cabinet fans on the Internet that were close to silent but could circulate the air well enough.
Eventually, all the materials came and, with the help of my parents, put everything together. The process took quite long time and we had a couple hiccups along the way, but we got it done and it came out pretty nice.
The moment of truth came and, to my relief, it ran so much quieter than without the cabinet. It was nowhere near silent but it reduced the noise a great deal. Soon after, I got the thing into the office and set everything up from there. Unfortunately, I was forced to underclock it because you could still hear the machine’s whining from outside the thin office door. Gunning the hashrate down about 25% to 3.7TH/s, I could lower the fan speed without risking the machine burning up. Sure, I wasn’t getting the full potential of the machine but I didn’t complain because electricity was not an issue there and it was still a whole lot better than my U3. With it up and running, I could leave it there, periodically checking to see if it was mining on Antpool.

The aftermath

In the months that followed, I was getting a solid $2.5 worth of BTC on daily basis. Half a year later, May of 2017, I had accumulated a satisfactory $600. I thought, “At this rate, I’d be able to pay my parents’ investment back in a few months” (the total investment came close to $900). Bitcoin had risen to over $1500 so I was already over the moon at that point because of how well everything was going. Little did I know…
I hit 0.5 BTC midway through September this year. The price of BTC had dropped after a sudden rise to $5000, but I couldn’t have asked for more. Although I possessed only half the amount of BTC I paid for the machine, its value was over twice that of the initial investment. I thought BTC would level off at around $4000 but nope.
In the month of October, the price skyrocketed. Since September, I had only mined 0.017 BTC but the value was already over $3000. It was just a matter of selling it, but I decided to hodl. Good thing I did.
As of November 5, I have approximately 0.52 BTC mined in total from my S7, valued at $4000. If I were to sell it right now, I’d have a profit of over $3100. And as for my miner, it’s churning out 0.0006 BTC daily, sounds like nothing but it’s still the equivalent of $5 today and I couldn’t be happier, at least with the miner and Bitcoin.
You remember that $665 for 1 BTC that I mentioned earlier? In hindsight, it would’ve been such a better idea to just keep that one Bitcoin and not do anything with it until today (in the interest of making much more money), as I’d theoretically have upwards of $7000. The idea of that still haunts me sometimes if I dwell on it too long but knowing that I’m in possession of an already hefty amount, the pain of it had numbed slightly. It’s not all doom and gloom for me from the exponential increase in Bitcoin’s value, however. Those first $0.3 payments from my humble little U3 all those years ago now are now the equivalent of over $6 today!
Bitcoin and everything it encompasses has been and still is a journey of discovery and an adventure. Looking back, starting with a modest €60 Antminer U3 to having a sum of Bitcoin equivalent to two extremely high-end gaming rigs (first thing I could think of as a comparison, sorry) has been something I can’t really describe. Through the course of the past few years, I’ve learned more about technology, I’ve unexpectedly gotten insight into economics and business and – of course – I’ve made a lot of money (if I decide to stop hodling that is).
Also, props to my parents for keeping an open mind throughout, I know some parents would be horrified at their kids being involved in something that has been used in some less-than-savoury ways and it's great knowing mine have been supportive all the way.
TL;DR got into Bitcoin mining 3 years ago at age 11 with an Antminer U3 that ran at 60 GH/s, got an Antminer S7 (4.73TH/s) and built a sound-muffling, ventilated cabinet for it. Am sat here today with $3000 profit if I decide to sell right now.
submitted by xx_riptide_xx to Bitcoin [link] [comments]

Bitcoin Mining Profitability: How Long Does it Take to Mine One Bitcoin in 2019?

When it comes to Bitcoin (BTC) mining, the major questions on people’s minds are “how profitable is Bitcoin mining” and “how long would it take to mine one Bitcoin?” To answer these questions, we need to take an in-depth look at the current state of the Bitcoin mining industry — and how it has changed — over the last several years.
Bitcoin mining is, essentially, the process of participating in Bitcoin’s underlying security mechanism — known as proof-of-work — to help secure the Bitcoin blockchain. In return, participants receive compensation in bitcoins (BTC).
When you participate in Bitcoin mining, you are essentially searching for blocks by crunching complex cryptographic challenges using your mining hardware. Once a block is discovered, new transactions are recorded and verified within the block and the block discoverer receives the block rewards — currently set at 12.5 BTC — as well as the transactions fees for the transactions included within the block.
Once the maximum supply of 21 million Bitcoins has been mined, no further Bitcoins will ever come into existence. This property makes Bitcoin deflationary, something which many argue will inevitably increase the value of each Bitcoin unit as it becomes more scarce due to increased global adoption.
The limited supply of Bitcoin is also one of the reasons why Bitcoin mining has become so popular. In previous years, Bitcoin mining proved to be a lucrative investment option — netting miners with several fold returns on their investment with relatively little effort.
bitcoin mining hardware
Mining Hardware
The mining hardware you choose will mostly depend on your circumstances — in terms of budget, location and electricity costs. Since the amount of hashing power you can dedicate to the mining process is directly correlated with how much Bitcoin you will mine per day, it is wise to ensure your hardware is still competitive in 2019.
Bitcoin uses SHA256 as its mining algorithm. Because of this, only hardware compatible with this algorithm can be used to mine Bitcoin. Although it is technically possible to mine Bitcoin on your current computer hardware — using your CPU or GPU — this will almost certainly not generate a positive return on your investment and you may end up damaging your device.
The most cost-effective way to mine Bitcoin in 2019 is using application-specific integrated circuit (ASIC) mining hardware. These are specially-designed machines that offer much higher performance per watt than typical computers and have been an absolutely essential purchase for anybody looking to get into Bitcoin mining since the first Avalon ASICs were shipped in 2013.
When it comes to selecting Bitcoin mining hardware, there are several main parameters to consider — though the importance of each of these may vary based on personal circumstances and budget.
Performance per Watt
When it comes to Bitcoin mining, performance per watt is a measure of how many gigahashes per watt a machine is capable of and is, hence, a simple measure of its efficiency. Since electricity costs are likely to be one of the largest expenses when mining Bitcoin, it is usually a good idea to ensure that you are getting good performance per watt out of your hardware.
Ideally, your mining hardware would be highly efficient, allowing it to mine Bitcoin with lower energy requirements — though this will need to be balanced with acquisition costs, as often the most efficient hardware is also the most expensive. This means it may take longer to see a return on investment.
In countries with cheap electricity, performance per watt is often less of a concern than acquisition costs and price-performance ratio. In most countries, operating outdated mining hardware is typically cost prohibitive, as energy costs outweigh the income generated by the mining equipment.
However, this may not be the case for those operating in countries with extremely cheap electricity — such as Kuwait and Venezuela — as even older equipment can still be profitable. Similarly, miners with a free energy surplus, such as from wind or solar electric generators, can benefit from the minimal gains offered by still running outdated hardware.
Longevity
The lifetime of mining hardware also plays a critical role in determining how profitable your mining venture will be. It’s always a good idea to do whatever possible to ensure it runs as smoothly as possible.
Since mining equipment tends to run at a full (or almost full) load for extended periods, they also tend to break down and fail more frequently than most electronics — which can seriously damage your profitability. Equipment failure is even more common when purchasing second-hand equipment. Since warranty claims are often challenging, it can often take a long time to receive a warranty replacement.
Price-Performance Ratio
In many cases, one of the major criteria used to select mining hardware is the price-performance ratio — a measure of how much performance a machine outputs per unit price. In the case of cryptocurrency mining hardware, this is commonly expressed as gigahashes per dollar or GH/$.
Under ideal circumstances, the mining hardware would have a high price-performance ratio, ensuring you get a lot of bang for your buck. However, this must also be considered in combination with the acquisition costs and the expected lifetime of the machine — since the absolute most powerful machines are not always the cheapest or the most energy efficient.
Acquisition Costs
Acquisition costs are almost always the biggest barrier to entry for most Bitcoin miners since most top-end mining hardware costs several thousand dollars. This problem is further compounded by the fact that many hardware manufacturers offer discounts for bulk purchases, allowing those with deeper pockets to achieve a better price-performance ratio.
Acquisition costs include all the costs involved in purchasing any mining equipment, including hardware costs, shipping costs, import duties, and any further costs. For example, many ASIC miners do not include a power supply — which can be another considerable expense, since the 1,000W+ power supplies usually required tend to cost several hundred dollars alone.
Ensuring your equipment runs smoothly can also add in additional costs, such as cooling and maintenance expenses. In addition, some miners may want to invest in uninterruptible power supplies to ensure their hardware keeps running — even if the power fails temporarily.
asic mining
Current Generation Hardware
One of the most recent additions to the Bitcoin mining hardware market is the Ebang Ebit E11++, which was released in October 2018. Using a 10nm fabrication process for its processors, the Ebit E11++ is able to achieve one of the highest hash rates on the market at 44TH/s.
In terms of efficiency, the Ebang Ebit E11++ is arguably the best on the market, offering 44TH/s of hash rate while drawing just 1,980W of power, offering 22.2GH/W performance. However, as of writing, the Ebang Ebit E11++ is out of stock until March 31, 2019 — while its price of $2,024 (excluding shipping) may make it prohibitively expensive for those first getting involved with Bitcoin mining.
Another popular choice is the ASICminer 8 Nano, a machine released in October 2018 that offers 44TH/s for $3,900 excluding shipping. The ASICminer 8 Nano draws 2,100W of power, giving it an efficiency of almost 21GH/W — slightly lower than the Ebit E11++ while costing almost double the price. However, unlike the E11++, the 8 Nano is actually in stock and available to purchase.
ASICminer also offers the 8 Nano Pro, a machine launched in mid-2018 that offers 80 TH/s of hash rate for $9,500 (excluding shipping). However, unlike the Ebit E11++ and 8 Nano, the minimum order quantity for the 8 Nano Pro is curiously set at five, meaning you will need to lay out a minimum of $47,500 in order to actually get your hands on one (or five).
While the 8 Nano Pro doesn’t offer the same performance per watt as the Ebit E11+ or AICMiner 8 Nano, it is one of the quieter miners on this list, making it more suitable for a home or office environment. That being said, the ASICminer 8 Nano Pro is easily the most expensive miner per TH on this list — costing a whopping $118.75/TH, compared to the $46/TH offered by the E11++ and $88.64 offered by the 8 Nano.
The latest hardware on this list is the Innosilicon T3 43T, which is currently available for pre-order at $2,279, and estimated to ship in March 2019. Offering 43TH/s of performance at 2,100W, the T3 43T comes in at an efficiency of 20.4GH/W, which is around 10 percent less energy efficient than the Ebit E11++.
The T3 43T also has a minimum order quantity of three units, making the minimum acquisition cost $6837 + shipping for preorders. All in all, the T3 43T is more costly and less efficient than the E11++ but may arrive slightly earlier since Ebang will not ship the E11++ units until at least end March 29, 2019.
Finally, this list would not be complete without including Bitmain’s latest offering, the Antminer S15-28TH/s, which — as its name suggests — offers 28TH/s of hash power while drawing just under 1600W at the wall. The Antminer S15 is one of the only SHA256 miners to use 7nm processors, making it somewhat smaller than some of the other devices on this list.
Like most pieces of top-end Bitcoin mining hardware, the Antminer S15 27TH/s model is currently sold out, with current orders not shipping until mid-February 2019. However, the S15 is offered at a significantly lower price than many of its competitors at just $1020 (excluding shipping), with no minimum quantity restriction. At these rates, the Antminer comes in at just $37.78/TH — though its energy efficiency is a much less impressive 17.5GH/W.
Mining Hardware Mining Hardware Comparison
Performance (GH/W) Price Performance Ratio ($/TH)
Ebang Ebit E11++ 22.2GH/W $46/TH
ASICminer 8 Nano 21GH/W $88.64/TH
ASICminer 8 Nano Pro 19GH/W $118.75/TH
Innosilicon T3 43T 20.4GH/W $53/TH
Antminer S15-28TH/s 17.5GH/W $37.78/TH
How To Select a Good Mining Pool
Mining pools are platforms that allow miners to pool their resources together to achieve a higher collective hash rate — which, in turn, allows the collective to mine more blocks than they would be able to achieve alone.
Typically, these mining pools will distribute block rewards to contributing miners based on the proportion of the hash rate they supply. If a pool contributing a total of 20 TH/s of hash rate successfully mines the next block, a user responsible for 10 percent of this hash rate will receive 10 percent of the 12.5 BTC reward.
Pools essentially allow smaller miners to compete with large private mining organizations by ensuring that the collective hash rate is high enough to successfully mine blocks on regular basis. Without operating through a mining pool, many miners would be unlikely to discover any blocks at all — due to only contributing a tiny fraction of the overall Bitcoin hash rate.
While it is quite possible to be successful mining without a pool, this typically requires an extremely large mining operation and is usually not recommended — unless you have enough hash rate to mine blocks on a regular basis.
Although it is technically possible to discover blocks mining solo and keep the entire 12.5 BTC reward for yourself, the odds of this actually occurring are practically zero — making pool collaboration practically the only way to compete in 2019 and beyond.
Selecting the best pool for you can be a challenging job since the vast majority of pools are quite similar and offer similar features and comparable fees. Because of this, we have broken down the qualities you should be looking for in a new pool into four categories; reputation, hash rate, pool fees, and usability/features:
Reputation
The reputation of a pool is one of the most important factors in selecting the pool that is best for you. Well-reputed pools will tend to be much larger than newer or less well-established pools since few pools with a poor reputation can stand the test of time.
Well-reputed pools also tend to be more transparent about their operation, many of which provide tools to ensure that each user is getting the correct reward based on the hash rate contributed. By using only pools with a great reputation, you also ensure your hash rate is not being used for nefarious purposes — such as powering a 51 percent attack.
When comparing a list of pools that appear suitable for you, it is a wise move to read their user reviews before making your choice — ensuring you don’t end up mining at a pool that steals your hard-fought earnings.
Hash Rate
When it comes to mining Bitcoin, the probability of discovering the next block is directly related to the amount of hashing power you contribute to the network. Because of this, one of the major features you should be considering when selecting your pool is its total hash rate — which is often closely related to the proportion of new blocks mined by the pool
Since the total hash rate of a pool is directly related to how quickly it discovers new blocks, this means the largest pools tend to discover a relative majority of blocks — leading to more regular rewards. However, the very largest pools also tend the have higher fees but often make up for this with sheer success and additional features.
Sometimes, some of the largest pools have a minimum hash rate requirement ù leaving some of the smaller miners left out of the loop. Although smaller pools typically have more relaxed requirements with reduced performance thresholds, these pools may be only slightly more profitable than mining solo.
Pool Fees
When choosing a suitable pool, typically one of the major considerations is its fees. Typically, most pools will charge a small fee that is deducted from your earnings and is usually around 1-2 percent — but sometimes slightly lower or higher.
There are also pools that offer 0 percent fees. However, these are often much smaller than the major pools and tend to make their money in a different way — such as through monthly subscriptions or donations.
Ideally, you will choose the pool that offers the best balance of fees to other features. Usually, the pool with the absolute lowest fees is not the best choice. Additionally, pools with the lowest fees often have the highest withdrawal minimums — making pool hopping uneconomical for most.
Usability and Features
When first starting out with Bitcoin mining, learning how to set up a pool and navigating through the settings can be a challenge. Because of this, several pools target their services to newer users by offering a simple to navigate user interface and providing detailed learning resources and prompt customer support.
However, for more experienced miners, simple pools don’t tend to offer a variety of features needed to maximize profitability. For example, although many mining pools focus their entire hash rate towards mining a single cryptocurrency, some are large enough to offer additional options — allowing users to mine other SHA256 coins such as Bitcoin Cash (BCH) or Fantom if they choose.
These pools are technically more challenging to use and mostly designed for those familiar with mining, happy to hop from coin to coin mining whichever is most profitable at the time. There are even some exchanges that automatically direct their combined hash rate at the most profitable cryptocurrency — taking the guesswork out of the equation.
bitcoin mining pool
Best Mining Pools for 2019
The Bitcoin mining pool industry has a large number of players, but the vast majority of the Bitcoin hash rate is concentrated within just a few pools. Currently, there are dozens of suitable pools to choose from — but we have selected just a few of the best to help get you started on your journey.
Slushpool was the first Bitcoin mining pool released, being launched way back in 2010 under the name “Bitcoin Pooled Mining Server.” Since then, Slushpool has grown into one of the most popular pools around — currently accounting for just under 10 percent of the total Bitcoin hash rate.
Although Slushpool isn’t one of the very largest pools, it does offer a newbie-friendly interface alongside more advanced features for those that need them. The pool has moderately high fees of 2 percent but offers servers in several countries — including the U.S., Europe, China, and Japan — giving it a good balance of fees to features.
BTC.com is another potential candidate for your pool and currently stands as the largest public Bitcoin mining pool. It is responsible for mining around 17 percent of new blocks. Being the largest public mining pool provides users with a sense of security, ensuring blocks are mined regularly and a stable income is made.
Image courtesy of Blockchain.info.
BTC.com is owned by Bitmain, a company that manufacturers mining hardware, and charges a 1.5 percent fees — placing it squarely in the middle-tier in terms of fees. Unlike other platforms, BTC.com uses its own payment structure known as FPPS (Full Pay Per Share), which means miners also receive a share of the transaction fees included within mined blocks — making it slightly more profitable than standard payment per share (PPS) pools.
Another great option is Antpool, a mining pool that supports mining services for 10 different cryptocurrencies, including Bitcoin, Litecoin (LTC) and Ethereum (ETH). AntPool frequently trades places with BTC.com as the largest Bitcoin mining pool. However, as of this writing, it occupies the title of the third-largest public mining pool.
What sets Antpool apart from other pools is the ability to choose your own fee system — including PPS, PPS+, and PPLNS. If you choose PPLNS, using Antpool is free but you will not receive any transaction fees from any blocks mined. Antpool also offers regular payouts and has a low minimum payout of just 0.001 BTC, making it suitable for smaller miners.
Last on the list of the best Bitcoin mining pools in 2019 is the Bitcoin.com mining pool. Although this is one of the smaller pools available, the Bitcoin.com pool has some redeeming features that make it worth a look. It offers mining contracts, allowing you to test out Bitcoin mining before investing in mining equipment of your own. According to Bitcoin.com, they are the highest paying Pay Per Share (PPS) pool in the world, offering up to 98 percent block rewards as well as automatic switching between BTC and BCH mining to optimize profitability.

Electricity Costs
While your mining hardware is most important when it comes to how much BTC you can earn when mining, your electricity costs are usually the largest additional expense. With electricity costs often varying dramatically between countries, ensuring you are on the best cost-per-KWh plan available will help to keep costs down when mining.
Most commonly, large mining operations will be set up in countries where electricity costs are the lowest — such as Iceland, India, and Ukraine. Since China has one of the lowest energy costs in the world, it was previously the epicenter of Bitcoin mining. However, since the government began cracking down on cryptocurrencies, it has largely fallen out of favor with miners.
Technically, Venezuela is one of the cheapest countries in the world in terms of electricity, with the government heavily subsidizing these energy costs — while Bitcoin offers an escape from the hyperinflation suffered by the Venezuelan bolivar. Despite this, importing mining hardware into the country is a costly endeavor, making it impractical for many people.
Finding ways to lower your electricity costs is one of the best ways to improve your mining profitability. This can include investing in renewable energy sources such as solar, geothermal, or wind — which can yield increased profitability over the long term.
if you are looking to buy bitcoin mining equipment here is some links:

Model Antminer S17 Pro (56Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 56Th/s for a power consumption of 2385W.
https://miningwholesale.eu/product/bitmain-antminer-s17-pro-56th-copy/?wpam_id=17
Model Antminer S9K from Bitmain mining SHA-256 algorithm with a maximum hashrate of 14Th/s for a power consumption of 1323W.
https://miningwholesale.eu/product/bitmain-antminer-s9k-14-th-s/?wpam_id=17
Model T2T 30Tfrom Innosilicon mining SHA-256 algorithm with a maximum hashrate of 30Th/s for a power consumption of 2200W.
https://miningwholesale.eu/product/innosilicon-t2t-30t/?wpam_id=17
mining wholesale website:
https://miningwholesale.eu/?wpam_id=17
submitted by mohamadk to Bitcoin [link] [comments]

howmanyconfs.com - How does the security of different Proof-of-Work blockchains compare to Bitcoin?

https://howmanyconfs.com
Original post in Bitcoin here: https://np.reddit.com/Bitcoin/comments/biokgy/howmanyconfscom_how_does_the_security_of/

https://github.com/lukechilds/howmanyconfs.com/raw/mastescreenshot.png

How are these values calculated?

It's easy to compare blockchain hashrates when the Proof-of-Work algorithm is the same. For example if Bitcoin has a hashrate of SHA-256 @ 40 PH/s and Bitcoin Cash has a hashrate of SHA-256 @ 2 PH/s, it's easy to see that for a given period of time the Bitcoin blockchain will have 20x (40/2) the amount of work securing it than the Bitcoin Cash blockchain. Or to say that differently, you need to wait for 20x more Bitcoin Cash confirmations before an equivalent amount of work has been done compared to the Bitcoin blockchain. So 6 Bitcoin confirmations would be roughly equivalent to 120 Bitcoin Cash confirmations in the amount of work done.
However if the Proof-of-Work algorithms are different, how can we compare the hashrate? If we're comparing Bitcoin (SHA-256 @ 40 PH/s) against Litecoin (Scrypt @ 300 TH/s), the hashes aren't equal, one round of SHA-256 is not equivalent to one round of Scrypt.
What we really want to know is how much energy is being consumed to provide the current hash rate. Literal energy, as in joules or kilowatt hours. It would be great if we had a universal metric across blockchains like kWh/s to measure immutability.
However that's fairly hard to calculate, we need to know the average power consumption of the average device used to mine. For GPU/CPU mined Proof-of-Work algorithms this varies greatly. For ASIC mined Proof-of-Work algorithms it varies less, however it's likely that ASIC manufacturers are mining with next generation hardware long before the public is made aware of them, which we can't account for.
There's no automated way to get this data and no reliable data source to scrape it from. We'd need to manually research all mining hardware and collate the data ourself. And as soon as newer mining hardware comes out our results will be outdated.
Is there a simpler way to get an estimated amount of work per blockchain in a single metric we can use for comparisons?
Yeah, there is, we can use NiceHash prices to estimate the cost in $ to secure a blockchain for a given timeframe. This is directly comparable across blockchains and should be directly proportionate to kWh/s, because after all, the energy needs to be paid for in $.
How can we estimate this?
Now we have an estimated total Proof-of-Work metric measured in dollars per second ($/s).
The $/s metric may not be that accurate. Miners will mark up the cost when reselling on NiceHash and we're making the assumption that NiceHash supply is infinite. You can't actually rent 100% of Bitcoin's hashpower from NiceHash, there isn't enough supply.
However that's not really an issue for this metric, we aren't trying to calculate the theoretical cost to rent an additional 100% of the hashrate, we're trying to get a figure that allows us to compare the cost of the current total hashrate accross blockchains. Even if the exact $ value we end up with is not that accurate, it should still be proportionate to kWh/s. This means it's still an accurate metric to compare the difference in work done over a given amount of time between blockchains.
So how do we compare these values between blockchains?
Once we've done the above calculations and got a $/s cost for each blockchain, we just need to factor in the average block time and calculate the total $ cost for a given number of confirmations. Then see how much time is required on the other blockchain at it's $/s value to equal the total cost.
So to calculate how many Litecoin confirmations are equivalent to 6 Bitcoin confirmations we would do:
Therefore we can say that 240 Litecoin confirmations are roughly equal to 6 Bitcoin confirmations in total amount of work done.

Notes

$/s doesn't mean what it sounds like it means.

The $/s values should not be taken as literal costs.
For example:
This is does not mean you could do a 51% attack on Bitcoin and roll back 6 blocks for a cost of $360,000. An attack like that would be much more expensive.
The $/s value is a metric to compare the amount of work at the current hashrate between blockchains. It is not the same as the cost to add hashrate to the network.
When adding hashrate to a network the cost will not scale linearly with hashrate. It will jump suddenly at certain intervals.
For example, once you've used up the available hashrate on NiceHash you need to add the costs of purchasing ASICs, then once you've bought all the ASICs in the world, you'd need to add the costs of fabricating your own chips to keep increasing hashrate.

These metrics are measuring "work done", not security.

More "work done" doesn't necessarily mean "more security".
For example take the following two blockchains:
Bitcoin Cash has a higher $/s value than Zcash so we can deduce it has more "work done" over a given timeframe than Zcash. More kWh/s are required to secure it's blockchain. However does that really mean it's safer?
Zcash is the dominant blockchain for it's Proof-of-Work algorithm (Equihash). Whereas Bitcoin Cash isn't, it uses the same algorithm as Bitcoin. In fact just 5% of Bitcoin's hashrate is equivalent to all of Bitcoin Cash's hashrate.
This means the cost of a 51% attack against Bitcoin Cash could actually be much lower than a 51% attack against Zcash, even though you need to aquire more kWh/s of work, the cost to aquire those kWh/s will likely be lower.
To attack Bitcoin Cash you don't need to acquire any hardware, you just need to convince 5% of the Bitcoin hashrate to lend their SHA-256 hashpower to you.
To attack Zcash, you would likely need to fabricate your own Equihash ASICs, as almost all the Equihash mining hardware in the world is already securing Zcash.

Accurately calculating security is much more complicated.

These metrics give a good estimated value to compare the hashrate accross different Proof-of-Work blockchains.
However to calculate if a payment can be considered "finalised" involves many more variables.
You should factor in:
If the cryptocurrency doesn't dominate the Proof-of-Work it can be attacked more cheaply.
If the market cap or trading volume is really low, an attacker may crash the price of the currency before they can successfully double spend it and make a profit. Although that's more relevant in the context of exchanges rather than individuals accepting payments.
If the value of the transaction is low enough, it may cost more to double spend than an attacker would profit from the double spend.
Ultimately, once the cost of a double spend becomes higher than an attacker can expect to profit from the double spend, that is when a payment can probably be considered "finalised".
submitted by dyslexiccoder to CryptoCurrency [link] [comments]

Asicpower AP9-SHA256 Review


Asicpower AP9-SHA256 Review

Bitmain is regarded as one of the most influential companies in the ASIC mining industry. It is estimated that they have manufactured approximately 53% of all mining equipment.Without including their mining profits, that’s around $140 million dollars in sales. These figures are staggering, but Bitmain’s monopoly of the Bitcoin ASIC market may come to an end, following the release of PowerAsic’s asicpower AP9-SHA256.

About the asicpower AP9-SHA256

Designed with brand new technology and boasting 94 TH/s per miner, the AP(-SHA256 is the most powerful and efficient Bitcoin miner to date.PowerAsic claims they spent $12 million dollars on research, development, and prototypes.PowerAsic also noted that their miners take advantage of ASICBOOST, an exploit of Bitcoin’s algorithm which improves mining efficiency by 20%.An unusual approach separate Powerasic’s miner to the other manufactures is the implementation of copper heat-sink claimed to have a superior thermal conductivity 69% better than aluminium. Don’t take their words for it but confirm the facts are correct on widely well known and published science documents as this one.The first batch of miners were announced and made available for order in August of 2019, with start scheduled for shipment in September, 2019.
Powerasic claims that the machines are around 40 percent more productive than the most proficient ASIC on the market, Bitmain’s Antminer S17.According to PowerAsic, they started a mining project with the aim to bring much needed competition to the market…We want to ‘make SHA256 great again.Sitting at the hefty price of $2,795.00, the powerasic AP9-SHA256 is far from affordable for the average person. Fortunately, due to the newly born rivalry between Bitmain and Powerasic, the price will probably lower with time and competition.The power supply for this unit is included and integrated in the top-box also including the controler card as a one unit. You will also get standard power cable, network cable, manual and software in the packet. In comparison to the price of the Antminer S17 , the Powerasic AP9-Sha256 is a better value.

Power Supply

The integrated PSU 3300W has a inputVoltage 220V 50Hz 30A. There are 2 fan 40mm., 1 fan 60mm to keep it cool and the power cable 3 legs following CEE 7 standard.Professional mining hardware runs optimally at 220-240V, hence why mining farms step down their own electricity supply to 220-240V. Note that 220V current is only found outside of the US – American outlets are 110V by default. Unless you want to hire an electrician, this could cause some people trouble adapt to the eficient and recomended 220V power needed, still 110V will get the job done, but they are not ideal for optimum mining performance.

Power Consumption

Thanks to the powerasic AP9-HA256’s new 7nm generation of ASIC chips, the AP9-SHA256 has become the most electrically-efficient miner on the market.Consuming merely 30.J/TB, or 2860W from the wall, the 16T is 30% more electrically-efficient than the Antminer S17.

Profitability

Powerasic ’s new ASIC technology is impressive. When compared to its closest competitor, the Antminer S17, the powerasic AP9-HA256 is the clear winner. It hashes at 94 TH/s, as opposed to the S17’s 56 TH/s. Moreover, the the AP9-HA256 consumes 30J/GH, whereas the S17 consumes 39-45J/TB.The difference in power consumption is miniscule, but when it comes to large-scale mining, the the AP9-HA256’s edge will drastically increase the profitability of a mining operation. This ASIC is profitable not only for mining on a large scale, but for the individual miner as well.Take a look at the projected mining profitability of a single miner:Note that is appears profitable even with high electricity costs ($0.1 per KW/h). With $0.05 / KW/h it’s even more profitable:📷Each powerasic AP9-HA256 will generate about $6,009 per year (calculated with 1 BTC=$10,141.5). Mining profitability may vary. You can usethis free profitability calculator to determine your projected earnings.

Is powerasic AP9-HA256 a Scam?

There is been a lot of talk on Twitter that powerasic AP9-HA256 is a scam. It appears it is not, as many users are already claiming to have received their miners.Slush, the creator ot Slush Mining Pool and the TREZOR hardware wallet, claims on Twitter that he has seen units and knows people who have had their miners delivered:

Verdict: Is The Antminer S17 Outdated?

When the first batch of Bitmain’s Antminer S17 ASICs reached the eager hands of miners, they were all the rage. The S17 was renowned as the most efficient ASIC miner on the market. Many used the S17 as the industry’s golden standard.Up until the launch of the powerasic AP9-HA256, it was the golden standard.But, now?Things have changed.Not only is the powerasic AP9-HA256 more powerful than its predecessor from Bitmain, but also more efficient, and therefore, more profitable.Ever since the announcement of the new ASIC, there was widespread speculation of its legitimacy – and rightly so.The Bitcoin community has been plagued with small, phony companies manipulating images of preexisting antminers as a ploy to hype up their fake products. Nevertheless, powerasic AP9-HA256 is taking things seriously, and their first batch of miners have lived up to expectations.The fact of the matter is, Bitmain’s most powerful and efficient antminer has been dethroned by the new reigning king of ASICs: The powerasic AP9-HA256.

Conclusion

Bitmain has dominated the ASIC market since its inception in 2013.There are a few other companies producing ASICs. However, before the creation of PowerAsics AP9-SHA256., Bitmain was the only company with a proven track record that sold efficient miners directly to the public.Powerasic AP9-HA256 has the potential to bring Bitmain’s monopoly to an end. Powerasic AP9-HA256 has a bright future ahead of them. Now that Bitmain has noteworthy competition, it will be interesting to see how it affects the market. The powerasic AP9-HA256 is the best option (for now) for anyone getting started with mining. Powerasic’s innovation should force other ASIC producers to innovate and force other companies to release new miners with better efficiency. So whether you’re buying a miner now or soon, you’re likely to benefit from the development of this new miner. For more, Visit Us: https://asicpower.net/product.php
submitted by farwa786 to u/farwa786 [link] [comments]

1/17/18 Obelisk Core Commentary on Bitmain A3

Some of the important information can also be found on the main discussion thread. Most statements from David Vorick (taek), who heads both Obelisk and Sia.

Statement in Obelisk discord #general

[11:42 PM] taek: Well, if they do anything stupid...
we took precautions and put an extra feature on the Sia chip. We can soft-fork Sia to invalidate the bitmain hardware without invalidating the Sia chip we're creating
[11:42 PM] taek: There's no need as long as they don't do anything stupid
[11:42 PM] Starbuckz8: I suspected you might have done that
[11:43 PM] taek: @Starbuckz8 and we're going to do it for every coin we make chips for
[11:43 PM] taek: If some actor starts behaving poorly, we want the devs to have a knife they can pull out, so they can hardfork without losing 100% of the network hardware
[11:44 PM] taek: We did it for decred too
[11:44 PM] taek: And we'll do it for Bitcoin, and we'll do it for the alts we're working on

Sia discord #announcements

[1:11 AM] taek: Bitmain has announced ASICs for Sia, shipping in 7 days. 1275w, 815 GH/s, ~$3200 USD. They are more expensive and less efficient than the Obelisk SC1, but they ship several months sooner (7 days as opposed to several months).
Bitmain has a long history of being abusive towards coin communities, their customers, and towards coin developers.We prepared for something like this by adding an extra feature to the SC1. We can do a soft-fork that slightly changes the PoW algorithm which would invalidate the bitmain ASICs, but allow the SC1 units to continue working. In the event of an attack from Bitmain, we can activate this soft fork. At this time, I do not think it is necessary, but if they start mining empty blocks or otherwise prove problematic for the network, we have recourse that does not involve destroying the usefulness of the SC1 units. This fork would of course require community adoption, it's not something the devs could decide to activate on their own. It would be a UASF, because the majority hashrate would not be standing behind the soft fork.
Overall, I do not think we have much to worry about. Hopefully (and very likely), this soft-fork will never be necessary. But I wanted to remind everyone (including Bitmain) that, at the end of the day, it is the community that has control, not the miners. If ASIC manufacturers act in a way that is harmful to the network, we have recourse.

Other Discussion

[12:14 AM] taek: @Pizard it's certainly not centralized control to build extra features into your hardware
[1:30 AM] taek: Yeah that's why I wanted to share our best simulation results. It's better than 2.25 GH/w btw. Our best result for the Sia miners is 3.7 GH/s per watt. But, that is really pushing it, we'd have to have a stable chip at 0.5V. Not clear it will be stable at 0.5V. 2.25 GH/w was at 0.6V, which is much more likely to work
Also, see https://www.reddit.com/siacoin/comments/7r4spy/dev_team_thoughts_on_the_bitmain_a3/?st=jcjn9kjx&sh=7e7a18c9
submitted by muunshot to siacoin [link] [comments]

Frequently Asked Questions

NOTICE

This post is a temporary resting place for FAQs while we wait for the release of VertDocs.

What is Vertcoin?

Vertcoin is a digital peer to peer currency focused on decentralization and ASIC resistance. Vertcoin is aiming to be easily accessible to the everyday user without extensive technical knowledge. Vertcoin has started to lower the barrier of entry with lots of video guides and the development of the One Click Miner (OCM).

Why does ASIC Resistance Matter?

ASICs (Application Specific Integrated Circuits) are dedicated mining devices that can only mine one algorithm. Coins like Bitcoin and Litecoin both made GPU mining obsolete when SHA-256 and Scrypt ASICs were created.
ASIC Resistance and How it Makes Vertcoin Decentralized
Vertcoin believes that ASIC resistance goes hand in hand with decentralization.
ASICs are made by companies like Bitmain and almost all the original sellers of ASICs sell on a preorder basis. When pre ordering an ASIC you are buying from a limited batch that the ASIC company has produced. Often times the batch will not be fully filled and the ASIC company will often have left over ASICs. When the ASIC company has left over ASICs they will put them to work mining. Soon enough the ASIC company will have a very large amount of unsold ASICs that are mining and slowly the ASIC company starts to own a large part of the network’s hashrate. When an ASIC company(s) starts to own a large majority of the hashrate the network can become very centralized after a while.
Having your network consist of a few large companies can be very dangerous as they could eventually get 51% hashing power and 51% attack your network, destabilizing the network. When your network is made out of a lot of smaller miners, like Vertcoin, it is much harder for your network to be 51% attacked, therefore increasing network security. By having centralized hashing power your coin effectively centralizing the network as the centralized hashing power can deny transactions and stop any activity they don’t want.

What Ways is Vertcoin Superior to Litecoin and Bitcoin?

Network Difficulty Adjustments with Kimoto Gravity Well
Vertcoin uses a difficulty adjustment called Kimoto Gravity Well which adjusts the difficulty every block, whereas Bitcoin and Litecoin’s difficulty changes every 2016 blocks. By adjusting the difficulty every block Vertcoin’s block time can stay consistent by adjusting for the fluctuation in network hash rate from hash rate renting and part time miners. If a large miner switches off Bitcoin or Litecoin mining the network could be slowed to a crawl until 2016 blocks are mined and the difficulty can change to adjust for the new network hash rate. We observed this happen to Bitcoin when Bitcoin Cash became more profitable than Bitcoin and Bitcoin’s network hash rate saw a steep fall off, slowing the network to a crawl. If this was to happen with Vertcoin the difficulty would adjust after 1 block was mined, allowing Vertcoin to always be profitable to mine.
Anyone can Meaningfully help Verify Transactions
In Proof-of-Work crypto currencies miners help secure the blockchain and get rewarded with the block reward. In ASIC mineable coins like Bitcoin and Litecoin you can’t meaningfully verify transactions unless you pay 1000-2000$ for a ASIC miner. When you mine with a CPU or GPU in a ASIC mineable coin you make no meaningful impact on the network. It is like trying to break concrete with a shovel while everyone else has a jackhammer.
Simple Upgrades Aren’t Held back by 1-2 Large Miners
In ASIC market people buy ASICs in batches in a preorder. With Bitcoin ASICs there is not enough demand for ASICs so the batch often doesn’t get sold out so now the manufacturer has spare ASICs. Now that the manufacturer has spare ASICs they will often start mining with them and eventually the ASIC company has one of the highest hash rates. If the ASIC company doesn’t want a certain upgrade to go through, for example SegWit, they can vote with their hash rate to hold back the upgrade forever or at least until people who want SegWit get more hash rate.
You Have a Say in Protocol Rules and Consensus
In Bitcoin you are a passive observer because you can only issue transactions and you have no part in the process after that. In Vertcoin you can be apart of the process for deciding the ordering of transactions and deciding what transactions get into blocks.
Block Rewards and Transaction Fees are Distributed Evenly
In Bitcoin and Litecoin the block rewards and transaction fees are often given to the large miners in China due to mining centralization created by ASICs. Vertcoin distributes its mining rewards to people all around the world thanks to the mining decentralization.

When will Atomic Swaps Be Ready?

Atomic Swaps can be done in two flavors: On-chain and Off-chain (via Lightning Network). On-chain swaps were actually done already using Blocknet, you can see it in use on Youtube. We're looking into doing it again using Interledger.
However our main focus is to do off-chain Atomic Swaps using Lightning Network technology. Because it has the same benefits as Lightning transactions: No network fees and instant transactions.
For off-chain swaps we need Lightning Network to be fully operational. It's difficult to give an ETA on that since we aren't the ones developing it. U/gertjaap posted a video on the current state of the Lightning Network for Vertcoin a while ago, which you can see here.
This was actually the "bleeding edge" of Lightning Network at the time. was able to use it on VTC's main net, meaning that our blockchain is ready for the good stuff. As you can see however, it can't yet be considered production ready (most users would want a little better UX than a command line app).
Now off-chain Atomic Swaps is a technique based on the same principles as Lightning Network, but adds an extra complexity for it being across chains. So it's basically the same as a "multi hop" Lightning payment, which is not yet built by any of the implementations. They're still working hard on making the single-hop payments robust. So in order for AS to be possible, LN has to be fully operational.
A timeline cannot be given at this time, because frankly we don't know. The implementation of Lightning Network we feel has the most potential is LIT, because it supports multiple currencies in its protocol (where LND is bitcoin-only at the time and requires significant work to support other currencies, which is an essential part of being able to work across multiple blockchains).
LIT is open source and there's nothing secretive about its progress, you can see the development on Github. We even have our lead dev James Lovejoy (u/jamesl22) close to the action and contributing to it where possible (and our team as well through testing it on the Vertcoin chain).
So we're not developing LN or AS ourselves, we're just ready with our blockchain technology whenever it becomes available.
If we have any real progress that has some substance, you can expect us to let the world know. We're not interested in fluffy marketing - we post something when we achieve real progress. And we are not keeping that secret.

How do I Choose the Right Vertcoin Wallet?

Deciding what Vertcoin wallet you should choose can be a difficult process. You can choose between three different wallets: Core, Electrum and Paper. Once you decide you can use the "How to Setup Your Vertcoin Wallets" video guide to assist you.

Core

The Core wallet is the wallet that most people should use. It will store the entire blockchain (~2GB) on your computer. The Core wallet is the only wallet that fully supports P2Pool mining. You will also have to use the Core wallet if you plan to run a P2Pool node or any Vertcoin related server.

Electrum

The Electrum wallet is a light wallet for Vertcoin. You do not have to download the blockchain on your computer, but you will still have your own private keys on your computer. This is recommended for people who don't need to store Vertcoins for very long and just need a quick but secure place to store them.

Paper

The Paper wallet is as the name implies, a physical paper wallet. When generating a paper wallet you will get a pdf that will need to print out. A paper wallet is normally used for long term storage since it is the safest way to store Vertcoins. A paper wallet can also be called "cold storage." Cold storage references the storage of your coins offline, preventing you from getting hacked over the internet.

Ledger Nano S

The Ledger Nano S is a hardware wallet designed by Ledger. A hardware wallet is similar to a paper wallet since it is normally used for cold storage. The hardware wallet is on par with the security of a paper wallet while being easy to use and setup. Note: You should never mine directly to a Ledger hardware wallet.

How do I start mining Vertcoin?

We have many guides available for you to use depending on your computer specifications.
Nvidia GPUs on Windows
Nvidia GPUs on Linux
AMD GPUs on Windows WARNING: Very unprofitable, AMD optimized miner is coming very soon.

Where can I get the One Click Miner (OCM)

You can get the latest version of the One Click Miner in the Vertcoin Discord. The download is pinned to the top of the #oneclick channel.

What do all the Numbers Mean on P2Pool’s Web Interface

I've seen a lot of confusion from new miners on public p2pool nodes, so here's a primer for the most common static node page style, for first time miners: https://imgur.com/K48GmMw

Active Miners on this Node

Address - This is the list of addresses currently mining on this node. If your address does not show up here, you are not mining on this node.
Hashrate
This is a snapshot of your hashrate as seen by the node. It will fluctuate up to 15% from the hashrate you are seeing on your mining software, but will average out to match the output in your mining software.
Rejected Hashrate
This is the amount of your hashing contribution that is rejected, both in hashrate and as a percentage of your total contribution. Running your own p2pool node minimizes this number. Mining on a node that is geographically close to reduce lag also minimizes this number. Ideally you would like it to be less than 1%, but most people seem happy keeping it under 3%.
Share Difficulty
This speaks for itself, it is the difficulty of the share being currently worked on. Bigger numbers are more difficult.
Time to Share
This is how long you need to mine before you will receive any payouts, or any "predicted payout." The lower your hashrate, the higher your time to share.
Predicted Payout
This is the reward you would receive if a block was found by p2pool right now. If it reads "no shares yet" then you have not yet been mining the requisite amount of time as seen in the previous "time to share" column.

Status

Network Hashrate
This is the total hashrate of all the miners mining vertcoin everywhere, regardless of where or how.
Global Pool Hashrate
This is the total hashrate of all the miners mining vertcoin on this p2pool network, be it the first network or the second network.
Local Pool Hashrate
This is the total hashrate of all the miners mining Vertcoin on this node.
Current Block Value
This is the reward that will be given for mining the current block. The base mining reward is currently 50 VTC per block, so any small decimal over that amount is transaction fees being paid by people using the network.
Network Block Difficulty
This is the difficulty of the block being mined. The higher the number, the higher the difficulty. This number rises as the "Network Hashrate" rises, so that blocks will always be found every 2.5 minutes. Inversely, this number falls when the "Network Hashrate" lowers as well.
Expected Time to Block
This is a guess at how much time will elapse between blocks being found by this p2pool network. This guess is accurate on average, but very inaccurate in the short term. Since you only receive a payout when the network finds a block, you can think of this as "Estimated Time to Payout."

Why is P2Pool Recommended Over Traditional Pools?

Decentralisation

P2Pool is peer to peer allowing a decentralized pool mining system. There are many nodes setup around the world that connect to each other too mine together. Many other coins have 1 very large pool that many miners connect to and sometimes the largest pool can have 51% or more of the network hash rate which makes the network vulnerable to a 51% attack. If P2Pool is the largest network then that prevents the Vertcoin network to be susceptible to a 51% attack as P2Pool is decentralized.

PPLNS Payout System

P2Pool uses a PPLNS (Pay Per Last N Shares) payout system which awards miners more the longer they mine, sort of like a loyalty system. A drawback to this system is that part time miners that aren't 24/7 won't be able to earn that much.

2 Networks

While Network 1 is catered towards 24/7 miners and people who have dedicated mining rigs, Vertcoin has a second P2Pool network where part time miners and miners under 100 MH/s can go to mine.

Mines Directly to Your Wallet

P2Pool mines directly to your wallet and cuts out the middleman. This reduces the likely hood that the pool will run away with your coins.

No Downtime

Since P2Pool is decentralized and has different nodes for you to choose from there will be no downtime because the P2Pool network does not die if one node goes down. You can setup a backup server in your miner so that you will have no downtime when mining.

Anonymity and Security

When using P2Pool you use a wallet address making your real identity anonymous, you are simply known by a random 34 letter string. Along with using a wallet address instead of a username there is no password involved P2Pool preventing the possibility of cracking your pool account (If you were on a traditional pool,) and stealing all your coins.

How do I Find a Nearby P2Pool Node

You can find the public p2pool nodes the the P2Pool Node Scanners. If you want to find a network 1 node go here. If you want to find a network 2 node go here.

How do I setup a P2Pool Node?

Linux P2Pool Setup
Windows P2Pool Setup (Text)
Windows P2Pool Setup (Video) This guide setups a network 2 node. When downloading Python download the 32bit version, not the 64bit. Downloading the 64bit version causes problems with the twisted install.
How do I setup a change my node to network 1 or network 2?
In the P2Pool startup script when you type the --network flag add vertcoin1 for network 1 and vertcoin2 for network 2 right after.

How do I Buy Vertcoin?

You can see a video guide on Youtube, "How to Buy Vertcoin with Fiat Using Bittrex and Coinbase"

How can I get help with "X problem?"

The quickest way for you to get help is for you to join the Vertcoin Discord Group. We almost always have knowledgable Vertans, whether that be developers or experienced Vertans, online to help you with whatever problems you may have.

How can I donate to the Developers?

You can donate to the dev fund at https://vertcoin.org/donate/. You can select what you want your funds to go to by donating to the corresponding address. You can also see how much funding is required and how much we have donated.

Where can I see what exchanges Vertcoin is on?

You can see what exchanges Vertcoin is listed on at CoinMarketCap. You can see what exchanges Vertcoin has applied to be on at this google docs spreadsheet.

Where can I see Vertcoin's Roadmap?

The Vertcoin developers currently have a trello board where you can see the goals and what the status of said goal is. You can also vote on what you want the Vertcoin developers to focus on next.

What is the Status of the AMD Optimized Miner?

The AMD Optimized Miner internal beta is aiming to be ready by the end of September. The AMD Optimized Miner is currently being developed by @turekaj on the Vertcoin Discord. He currently does not have a Reddit account and Discord is the only way you can contact him.

What Does Halving Mean?

Halving means that the block reward for miners will be split in half. Halving happens around every 4 years for Vertcoin or 840,000 blocks. This means around December miners will only receive 25 VTC per block instead of the current 50 VTC per block.
If you would like to add another question to this list please comment it and I will get around to adding it ASAP.
submitted by asianboygames to vertcoin [link] [comments]

DD on Crypto. Just kidding Allin AMD

Alright, I keep seeing you fucks talk about how "Bitcoin is going to make Nvidia/AMD go to the moon". I'm going to walk all you fucks through bitcoin, crypto currencies, and how they effect the GPU market.
What is Bitcoin?
Bitcoin is a decentralized ledger. That's pretty much it. A set number of bitcoin is generated per block, and each block is solved when a resulting hash is found for the corresponding proof of work. The difficulty is adjusted periodically based on a formula, meaning that as hash rate rises and falls, the number of bitcoins produced per day is roughly the same.
What does Bitcoin have to do with AMD and Nvidia?
Fucking nothing. Bitcoin is mined on proprietary hardware called Application-specific Integrated Circuits (ASICs). Neither AMD or Nvidia produce these.
Why does everyone keep talking about Bitcoin and AMD then?
Because they're fucking retarded and you're listening to retards. Bitcoin runs on the SHA-256 Hashing Function which people have custom hardware for. The Crypto driving GPU sales is ETHEREUM, NOT BITCOIN
What the fuck is Ethereum then?
Don't worry about it. It's for smug assholes who are too edgy for Bitcoin. All you need to know is it runs on a different Hashing function than Bitcoin, so if you weren't a retard you'd probably realize that the proprietary hardware I talked about earlier won't work with it. Currently Ethereum is being mined the same way Bitcoin was when it first started; on GPUs.
When are you going to tell me what to buy
Shut the fuck up, learn something or kill your self.
How many GPUs are being used to mine currently?
Currently the Ethereum Hash Rate is 73,000 GH/s. For upcoming earnings, we should instead look at the period from April to June. April 1st shows a network hash rate of 16,500 GH/s, and June 31st shows 59,200 GH/s, meaning the network hash rate increased by 42,700 GH/s for this upcoming earnings report quarter.
I've linked a decent benchmark for GPU hashrate . You should notice that all of these are quoted in MH/s, versus the Network reporting in GH/s; there are ALOT of fucking GPUs running on the network. A top of the line 1080 puts out about 20-25 MH/s, a good Radeon card does about 30. As a rough estimate, lets assume that the average card mining Ethereum currently produces about 25 MH/s. 42,700GH/s / 25MH/s means that there are 1.7 MILLION more GPUs currently mining ethereum than there were at the beginning of Q1. Based on my personal observations being involved in this, AMD is actually taking a majority market share of the sold cards just due to their superior performance compared to Nvidia's 1080s, and I'd estimate that About 50-60% of the cards currently mining Ethereum are AMD Radeons.
What does this all mean?
AMD are selling their highest margin video cards faster than they can produce them, and at ~250$ a pop with 50%-60% market capture AMD will have sold roughly 200-300 million dollars more in video cards than they did last quarter. AMD quarterly revenue last reported was just under 1 Billion. This is a 20-30% increase in revenue from last quarter, where Ethereum Hash Rate only increased by about 10,000GH/s. Even assuming a modest 30% margin for their video cards, AMD will still have almost 60 million in unexpected earnings this quarter due to crypto mining, which translates to about .06-.1 per share in earnings.
tl;dr
Ethereum will make AMD beat revenue by 20-30%. BUY AMD YOU CUCKS.
submitted by Askmeaboutmyautism to wallstreetbets [link] [comments]

Decred Journal — May 2018

Note: New Reddit look may not highlight links. See old look here. A copy is hosted on GitHub for better reading experience. Check it out, contains photo of the month! Also on Medium

Development

dcrd: Significant optimization in signature hash calculation, bloom filters support was removed, 2x faster startup thanks to in-memory full block index, multipeer work advancing, stronger protection against majority hashpower attacks. Additionally, code refactoring and cleanup, code and test infrastructure improvements.
In dcrd and dcrwallet developers have been experimenting with new modular dependency and versioning schemes using vgo. @orthomind is seeking feedback for his work on reproducible builds.
Decrediton: 1.2.1 bugfix release, work on SPV has started, chart additions are in progress. Further simplification of the staking process is in the pipeline (slack).
Politeia: new command line tool to interact with Politeia API, general development is ongoing. Help with testing will soon be welcome: this issue sets out a test plan, join #politeia to follow progress and participate in testing.
dcrdata: work ongoing on improved design, adding more charts and improving Insight API support.
Android: design work advancing.
Decred's own DNS seeder (dcrseeder) was released. It is written in Go and it properly supports service bit filtering, which will allow SPV nodes to find full nodes that support compact filters.
Ticket splitting service by @matheusd entered beta and demonstrated an 11-way split on mainnet. Help with testing is much appreciated, please join #ticket_splitting to participate in splits, but check this doc to learn about the risks. Reddit discussion here.
Trezor support is expected to land in their next firmware update.
Decred is now supported by Riemann, a toolbox from James Prestwich to construct transactions for many UTXO-based chains from human-readable strings.
Atomic swap with Ethereum on testnet was demonstrated at Blockspot Conference LATAM.
Two new faces were added to contributors page.
Dev activity stats for May: 238 active PRs, 195 master commits, 32,831 added and 22,280 deleted lines spread across 8 repositories. Contributions came from 4-10 developers per repository. (chart)

Network

Hashrate: rapid growth from ~4,000 TH/s at the beginning of the month to ~15,000 at the end with new all time high of 17,949. Interesting dynamic in hashrate distribution across mining pools: coinmine.pl share went down from 55% to 25% while F2Pool up from 2% to 44%. [Note: as of June 6, the hashrate continues to rise and has already passed 22,000 TH/s]
Staking: 30-day average ticket price is 91.3 DCR (+0.8), stake participation is 46.9% (+0.8%) with 3.68 million DCR locked (+0.15). Min price was 85.56. On May 11 ticket price surged to 96.99, staying elevated for longer than usual after such a pump. Locked DCR peaked at 47.17%. jet_user on reddit suggested that the DCR for these tickets likely came from a miner with significant hashrate.
Nodes: there are 226 public listening and 405 normal nodes per dcred.eu. Version distribution: 45% on v1.2.0 (up from 24% last month), 39% on v1.1.2, 15% on v1.1.0 and 1% running outdaded versions.

ASICs

Obelisk team posted an update. Current hashrate estimate of DCR1 is 1200 GH/s at 500 W and may still change. The chips came back at 40% the speed of the simulated results, it is still unknown why. Batch 1 units may get delayed 1-2 weeks past June 30. See discussions on decred and on siacoin.
@SiaBillionaire estimated that 7940 DCR1 units were sold in Batches 1-5, while Lynmar13 shared his projections of DCR1 profitability (reddit).
A new Chinese miner for pre-order was noticed by our Telegram group. Woodpecker WB2 specs 1.5 TH/s at 1200 W, costs 15,000 CNY (~2,340 USD) and the initial 150 units are expected to ship on Aug 15. (pow8.comtranslated)
Another new miner is iBelink DSM6T: 6 TH/s at 2100 W costing $6,300 (ibelink.co). Shipping starts from June 5. Some concerns and links were posted in these two threads.

Integrations

A new mining pool is available now: altpool.net. It uses PPLNS model and takes 1% fee.
Another infrastructure addition is tokensmart.io, a newly audited stake pool with 0.8% fee. There are a total of 14 stake pools now.
Exchange integrations:
OpenBazaar released an update that allows one to trade cryptocurrencies, including DCR.
@i2Rav from i2trading is now offering two sided OTC market liquidity on DCUSD in #trading channel.
Paytomat, payments solution for point of sale and e-commerce, integrated Decred. (missed in April issue)
CoinPayments, a payment processor supporting Decred, developed an integration with @Shopify that allows connected merchants to accept cryptocurrencies in exchange for goods.

Adoption

New merchants:
An update from VotoLegal:
michae2xl: Voto Legal: CEO Thiago Rondon of Appcívico, has already been contacted by 800 politicians and negotiations have started with four pre-candidates for the presidency (slack, source tweet)
Blockfolio rolled out Signal Beta with Decred in the list. Users who own or watch a coin will automatically receive updates pushed by project teams. Nice to see this Journal made it to the screenshot!
Placeholder Ventures announced that Decred is their first public investment. Their Investment Thesis is a clear and well researched overview of Decred. Among other great points it noted the less obvious benefit of not doing an ICO:
By choosing not to pre-sell coins to speculators, the financial rewards from Decred’s growth most favor those who work for the network.
Alex Evans, a cryptoeconomics researcher who recently joined Placeholder, posted his 13-page Decred Network Analysis.

Marketing

@Dustorf published March–April survey results (pdf). It analyzes 166 responses and has lots of interesting data. Just an example:
"I own DECRED because I saw a YouTube video with DECRED Jesus and after seeing it I was sold."
May targeted advertising report released. Reach @timhebel for full version.
PiedPiperCoin hired our advisors.
More creative promos by @jackliv3r: Contributing, Stake Now, The Splitting, Forbidden Exchange, Atomic Swaps.
Reminder: Stakey has his own Twitter account where he tweets about his antics and pours scorn on the holders of expired tickets.
"Autonomy" coin sculpture is available at sigmasixdesign.com.

Events

BitConf in Sao Paulo, Brazil. Jake Yocom-Piatt presented "Decentralized Central Banking". Note the mini stakey on one of the photos. (articletranslated, photos: 1 2 album)
Wicked Crypto Meetup in Warsaw, Poland. (video, photos: 1 2)
Decred Polska Meetup in Katowice, Poland. First known Decred Cake. (photos: 1 2)
Austin Hispanic Hackers Meetup in Austin, USA.
Consensus 2018 in New York, USA. See videos in the Media section. Select photos: booth, escort, crew, moon boots, giant stakey. Many other photos and mentions were posted on Twitter. One tweet summarized Decred pretty well:
One project that stands out at #Consensus2018 is @decredproject. Not annoying. Real tech. Humble team. #BUIDL is strong with them. (@PallerJohn)
Token Summit in New York, USA. @cburniske and @jmonegro from Placeholder talked "Governance and Cryptoeconomics" and spoke highly of Decred. (twitter coverage: 1 2, video, video (from 32 min))
Campus Party in Bahia, Brazil. João Ferreira aka @girino and Gabriel @Rhama were introducing Decred, talking about governance and teaching to perform atomic swaps. (photos)
Decred was introduced to the delegates from Shanghai's Caohejing Hi-Tech Park, organized by @ybfventures.
Second Decred meetup in Hangzhou, China. (photos)
Madison Blockchain in Madison, USA. "Lots of in-depth questions. The Q&A lasted longer than the presentation!". (photo)
Blockspot Conference Latam in Sao Paulo, Brazil. (photos: 1, 2)
Upcoming events:
There is a community initiative by @vj to organize information related to events in a repository. Jump in #event_planning channel to contribute.

Media

Decred scored B (top 3) in Weiss Ratings and A- (top 8) in Darpal Rating.
Chinese institute is developing another rating system for blockchains. First round included Decred (translated). Upon release Decred ranked 26. For context, Bitcoin ranked 13.
Articles:
Audios:
Videos:

Community Discussions

Community stats: Twitter 39,118 (+742), Reddit 8,167 (+277), Slack 5,658 (+160). Difference is between May 5 and May 31.
Reddit highlights: transparent up/down voting on Politeia, combining LN and atomic swaps, minimum viable superorganism, the controversial debate on Decred contractor model (people wondered about true motives behind the thread), tx size and fees discussion, hard moderation case, impact of ASICs on price, another "Why Decred?" thread with another excellent pitch by solar, fee analysis showing how ticket price algorithm change was controversial with ~100x cut in miner profits, impact of ticket splitting on ticket price, recommendations on promoting Decred, security against double spends and custom voting policies.
@R3VoLuT1OneR posted a preview of a proposal from his company for Decred to offer scholarships for students.
dcrtrader gained a couple of new moderators, weekly automatic threads were reconfigured to monthly and empty threads were removed. Currently most trading talk happens on #trading and some leaks to decred. A separate trading sub offers some advantages: unlimited trading talk, broad range of allowed topics, free speech and transparent moderation, in addition to standard reddit threaded discussion, permanent history and search.
Forum: potential social attacks on Decred.
Slack: the #governance channel created last month has seen many intelligent conversations on topics including: finite attention of decision makers, why stakeholders can make good decisions (opposed to a common narrative than only developers are capable of making good decisions), proposal funding and contractor pre-qualification, Cardano and Dash treasuries, quadratic voting, equality of outcome vs equality of opportunity, and much more.
One particularly important issue being discussed is the growing number of posts arguing that on-chain governance and coin voting is bad. Just a few examples from Twitter: Decred is solving an imagined problem (decent response by @jm_buirski), we convince ourselves that we need governance and ticket price algo vote was not controversial, on-chain governance hurts node operators and it is too early for it, it robs node operators of their role, crypto risks being captured by the wealthy, it is a huge threat to the whole public blockchain space, coin holders should not own the blockchain.
Some responses were posted here and here on Twitter, as well as this article by Noah Pierau.

Markets

The month of May has seen Decred earn some much deserved attention in the markets. DCR started the month around 0.009 BTC and finished around 0.0125 with interim high of 0.0165 on Bittrex. In USD terms it started around $81 and finished around $92, temporarily rising to $118. During a period in which most altcoins suffered, Decred has performed well; rising from rank #45 to #30 on Coinmarketcap.
The addition of a much awaited KRW pair on Upbit saw the price briefly double on some exchanges. This pair opens up direct DCR to fiat trading in one of the largest cryptocurrency markets in the world.
An update from @i2Rav:
We have begun trading DCR in large volume daily. The interest around DCR has really started to grow in terms of OTC quote requests. More and more customers are asking about trading it.
Like in previous month, Decred scores high by "% down from ATH" indicator being #2 on onchainfx as of June 6.

Relevant External

David Vorick (@taek) published lots of insights into the world of ASIC manufacturing (reddit). Bitmain replied.
Bitmain released an ASIC for Equihash (archived), an algorithm thought to be somewhat ASIC-resistant 2 years ago.
Three pure PoW coins were attacked this month, one attempting to be ASIC resistant. This shows the importance of Decred's PoS layer that exerts control over miners and allows Decred to welcome ASIC miners for more PoW security without sacrificing sovereignty to them.
Upbit was raided over suspected fraud and put under investigation. Following news reported no illicit activity was found and suggested and raid was premature and damaged trust in local exchanges.
Circle, the new owner of Poloniex, announced a USD-backed stablecoin and Bitmain partnership. The plan is to make USDC available as a primary market on Poloniex. More details in the FAQ.
Poloniex announced lower trading fees.
Bittrex plans to offer USD trading pairs.
@sumiflow made good progress on correcting Decred market cap on several sites:
speaking of market cap, I got it corrected on coingecko, cryptocompare, and worldcoinindex onchainfx, livecoinwatch, and cryptoindex.co said they would update it about a month ago but haven't yet I messaged coinlib.io today but haven't got a response yet coinmarketcap refused to correct it until they can verify certain funds have moved from dev wallets which is most likely forever unknowable (slack)

About This Issue

Some source links point to Slack messages. Although Slack hides history older than ~5 days, you can read individual messages if you paste the message link into chat with yourself. Digging the full conversation is hard but possible. The history of all channels bridged to Matrix is saved in Matrix. Therefore it is possible to dig history in Matrix if you know the timestamp of the first message. Slack links encode the timestamp: https://decred.slack.com/archives/C5H9Z63AA/p1525528370000062 => 1525528370 => 2018-05-05 13:52:50.
Most information from third parties is relayed directly from source after a minimal sanity check. The authors of Decred Journal have no ability to verify all claims. Please beware of scams and do your own research.
Your feedback is precious. You can post on GitHub, comment on Reddit or message us in #writers_room channel.
Credits (Slack names, alphabetical order): bee, Richard-Red, snr01 and solar.
submitted by jet_user to decred [link] [comments]

Halong Mining - Announcing the most efficient Bitcoin miner in the world.

Highlighting is my own:

Announcing the DragonMint miner series

The DragonMint 16T miner is the world’s most efficient Bitcoin miner, running faster and cooler than any competing miners. It’s the culmination of over 12 months research and development which has resulted in major advancements in mining technology including a brand new generation of ASIC mining chips. The DM8575 ASIC runs at a staggering 85GH per chip with power efficiency of around 0.075J/GH.
The DragonMint miner is the first step in a long strategy, which started in December 2016, to bring much needed competition and innovation to the Bitcoin mining arena. Over 100 world class experts and leaders in their respective fields have been contributing to and working on the project, including chip designers, electronics hardware specialists, and software designers. The project is motivated by, and driven to help facilitate greater decentralisation in Bitcoin mining at all levels, and make sha256 great again.
Now that we have finished the major prototyping and small run batch zero, we are ready to move onto mass production. This is the first stage of rollout, and simultaneously, relationships are being built with other channels to bring a wide variety of products based on the new ASIC chips.
Unlike many other mining projects, the DragonMint is not a design based on simulations. Around $30 million dollars have already been spent on research, development and prototyping miners, writing software and producing small batches of silicon wafers. The time, complexity and cost cannot be underestimated. The next step is mass production. Producing miners from scratch takes around 4 months including manufacturing the silicon chips. We are taking preorders for the next generation miner for delivery starting in March 2018.
We would like to see other Bitcoin mining hardware manufacturers compete equally although it is currently quite challenging due to both heavy competition and prohibitive startup costs. One of the ways we can assist is by publishing board designs and software to allow newcomers to iterate on already advanced design. Production of competitive ASIC chips is a whole different level of difficulty, so we believe this can be alleviated by making chips available in bulk to competitors. Bitcoin is inherently collaborative and we believe the incentives are aligned to promote a healthy mining ecosystem that is still profitable for the participants.
All our strengths aside, we recognise that success in this field is an uphill battle and the game is extremely competitive. Because of the time taken to design new technology and bring it to market, time advantage is a key strategy in order to gain a foothold against formidable competition. For this reason we will defer publishing board designs or software (either directly or through partner channels), until we the first batch of miners is near ready for shipping. Because we have considerable costs to recoup, particular details of our process will also not be made available until closer to shipping of the first batches, to give us a better chance of succeeding and being able to drive forward with innovation into the future.
We will publish more details on our blog, on this website and on Twitter @halongmining.
Demonstration video (Youtube): https://www.youtube.com/watch?v=SRCsQUyR7_I
submitted by StopAndDecrypt to btc [link] [comments]

My concerns about SmartCash

Hello folks!
I have been doing a lot of reading about the SmartCash cryptocurrency recently. SmartCash claims to be a private cryptocurrency that also focuses on a community-centered model.
However, a lot of what I've found has concerned me.
But first - I'd like to invite anyone with an opposing point of view to share their opinions after reading this. I'm not in this to spread baseless accusations, I just want an educated conversation. Please do not downvote simply because you disagree; instead, read my post, make a comment and discuss the topic with me. I've sent PM's to several people who support SmartCash in order to let them make their opinions clear.
That said, let's go through this point by point - we'll start with the distribution.
From the official SmartCash website:
Traditional cryptocurrencies, like Bitcoin, reward only the miners while neglecting the other actors that play an active role in maintaining, developing and promoting the project. SmartCash is a community-centric cryptocurrency, where community and development comes first. 80% of the block reward has been allocated to fund SmartHive community proposals as well as the Hive Teams. 20% of the remaining block reward has been allocated to Mining (5%) and SmartRewards (15%).
In the name of staying unbiased, I am going to acknowledge my ideological beliefs about mining, as well as my own personal biases as a miner, that miners should receive 100% of the rewards for the work they did. With this out of the way, let's discuss the mathematics of SmartCash's block reward distribution.
80% goes to community projects, 15% goes to SmartRewards (staking equivalent, but not used for consensus), and 5% goes to the miners. In theory, this will lead to 95% less miners than normal, ensuring miners get paid roughly the same. In practice, this won't necessarily be true.
But the existence of fewer miners also presents many issues. There have been several 51% attacks against cryptocurrencies that give all block rewards to miners - Krypton in 2016, Feathercoin in 2013, and Dashcoin (a cryptonote fork DSH, not DASH) by MinerGate in April of 2017.
Chain consensus with SmartCash is determined entirely by proof of work, not proof of stake; therefore you do not need to own any coins in order to attack the network and achieve 51% hashrate.
In the case of a cryptocurrency that gives miners 5% of the block rewards, achieving 51% of nethash is quite easy, because fewer people will be mining. SmartCash's current network hashrate is 10 Th/s or 10 trillion hashes per second; a conservative estimate for a GTX 1080's hashrate is 1 Gh/s or 1 billion hashes per second. Therefore, the network is currently secured by the equivalent of 10,000 GTX 1080 GPUs.
Given that this GPU costs approximately $500, it would take about $5 million to conduct a 51% attack on the network. At nicehash prices of ~0.3 BTC/TH/S/Day, this would cost ~$60,000 per day, taking into account a necessary raise in the offered price to 'persuade' more people to switch to Keccak algo, as only 2TH/s is currently for sale on Nicehash.
Even worse, Keccak (Smartcash’s hashing algorithm) was specifically designed to be ASIC-friendly. From the official Keccak website:
Keccak, the winner of the SHA-3 competition, is blazing fast when implemented on dedicated (ASIC) or programmable (FPGA) hardware.
So if somebody ever modified a Keccak ASIC for mining, it would also be easy to conduct a 51% attack.
Let’s move on. Remember how they said that 80% of the block rewards go to a community fund? That address is here, and it controls 55% of the SmartCash in existence. This address is used to fund proposals that are voted on by the community. The problem is that the private key to this address is owned by the developers - and regardless of their past honesty, this system still requires trust in them. A trust-required system is directly contrary to the principles of cryptocurrency. The developers, despite your trust in them, could still sell some of those coins at any time.
Next up we'll discuss SmartCash's privacy. SmartCash uses the Zerocoin protocol for privacy, as it was forked from Zcoin. Zerocoin breaks the link between sender and receiver, but unlike Zerocash and ringCT, it does not hide the transaction amount. Furthermore, SmartCash's privacy is optional, and it is transparent by default. Transparency by default is bad for the following reasons:
(1) it reduces the anonymity set
(2) it makes private transactions inherently more suspicious
(3) it allows sender to harm the privacy of recipient
(4) it makes it impossible to hide your wealth
(5) it makes the currency non-fungible.
My last concern with SmartCash is the coin distribution. Currently, as shown on the SmartCash Rich List, the top 100 addresses control 98.42% of funds. This is a highly unbalanced situation, and it also means that the vast majority of SmartCash wealth is held by a small number of people. With Bitcoin, the top 100 addresses control roughly 32% of funds, which is not perfect, but certainly much better.
In summary, SmartCash is a great idea - a private, community-oriented cryptocurrency - but it is executed in a suboptimal manner.
I would be happy to hear your opinions on this, whether you agree or disagree.
-KnifeOfPi2
submitted by KnifeOfPi2 to CryptoCurrency [link] [comments]

New people please read this. [upvote for visibility please]

I am seeing too many new people come and and getting confused. Litecoin wiki isn't the greatest when it comes to summing up things so I will try to do things as best as I can. I will attempt to explain from what I have learned and answer some questions. Hopefully people smarter than me will also chime in. I will keep this post updated as much as I can.
Preface
Litecoin is a type to electronic currency. It is just like Bitcoin but it there are differences. Difference explained here.
If you are starting to mine now chances are that you have missed the Bitcoin mining train. If you really want your time and processing power to not go to waste you should mine LTC because the access to BTC from there is much easier.
Mining. What is it?
Let's get this straight. When making any financial commitment to this be prepared to do it with "throw away" money. Mining is all about the hashrate and is measured in KH/s (KiloHash/sec). Unlike the powerful ASICs (Application Specific Integrated Circuit) that are used to mine bitcoins using hashrates in the GH/s and even TH/s, litecoin mining has only been able to achieve at the very best MH/s. I think the highest I've seen is 130 MH/s so far. Which leads us to our next section.
Mining Hardware
While CPU mining is still a thing it is not as powerful as GPU mining. Your laptop might be able to get 1 a month. However, I encourage you to consult this list first. List of hardware comparison You will find the highest of processors can maybe pull 100 KH/s and if we put this into a litecoin mining calculator it doesn't give us much.
Another reason why you don't want to mine with your CPU is pretty simple. You are going to destroy it.
So this leaves us with GPUs. Over the past few months (and years) the HD 7950 has been the favourite because it drains less power and has a pretty good hashrate. But recently the introduction of the R9 290 (not the x) has changed the game a bit. People are getting 850 KH/s - 900 KH/s with that card. It's crazy.
Should I mine?
Honestly given the current difficulty you can make a solid rig for about $1100 with a hashrate of 1700 KH/s which would give you your investment back in about a month and a half. I am sure people out there can create something for much cheaper. Here is a good example of a setup as suggested by dystopiats
PCPartPicker part list / Price breakdown by merchant / Benchmarks
Type Item Price
CPU AMD Sempron 145 2.8GHz Single-Core Processor $36.01 @ Amazon
Motherboard ASRock 970 EXTREME4 ATX AM3+ Motherboard $99.48 @ OutletPC
Memory Crucial Ballistix Tactical Tracer 4GB (1 x 4GB) DDR3-1866 Memory $59.99 @ Newegg
Video Card Sapphire Radeon HD 7950 3GB Video Card (3-Way CrossFire) $245.38 @ Newegg
Video Card Sapphire Radeon HD 7950 3GB Video Card (3-Way CrossFire) $245.38 @ Newegg
Video Card Sapphire Radeon HD 7950 3GB Video Card (3-Way CrossFire) $245.38 @ Newegg
Power Supply SeaSonic Platinum 860W 80+ Platinum Certified Fully-Modular ATX Power Supply $146.98 @ SuperBiiz
Total
Prices include shipping, taxes, and discounts when available. $1078.60
Generated by PCPartPicker 2013-11-29 00:52 EST-0500
Estimated Hashrate (with GPU overclocking) : 1900 KH/s
Hardware Fundamentals
CPU - Do you need a powerful CPU? No but make sure it is a decent one. AMD CPUs are cheap to buy right now with tons of power. Feel free to use a Sempron or Celeron depending on what Motherboard you go with.
RAM - Try to get at least 4 GB so as to not run into any trouble. Memory is cheap these days. I am saying 4 GB only because of Windoze. If you are plan to run this on Linux you can even get away with less memory.
HDD Any good ol 7200 RPM hard drive will do. Make sure it is appropriate. No point in buying a 1TB hard drive. Since, this is a newbie's guide I assumed most won't know how to run linux, but incase you do you can get a USB flash drive and run linux from it thus removing the need for hard drive all toghether. (thanks dystopiats)
GPU - Consult the list of hardware of hardware I posted above. Make sure you consider the KH/s/W ratio. To me the 290 is the best option but you can skimp down to 7950 if you like.
PSU - THIS IS BLOODY IMPORTANT. Most modern GPUs are power hungry so please make sure you are well within the limits of your power consumption.
MOTHERBOARD - Ok, so a pretty popular board right now is Gigabyte GA-990FXA-UD3 and the ASRock 970 Extreme4. Some people are even going for Gigabyte GA-990FXA-UD5 and even the mighty Gigabyte GA-990FXA-UD7 because it has more PCI-E slots. 6 to be exact. However you may not need that much. With risers you can get more shoved into less.
PCI-E RISERS - These are called risers. They come in x16 to x16 and x1 to x16 connections. Here is the general rule of thumb. This is very important. Always get a POWERED riser otherwise you will burn a hole in your MoBo. A powered rise as a molex connector so that additional power from PSU can be supplied.
When it comes to hardware I've provided the most basic knowledge you need. Also, take a look at cryptobader's website. This is very helpful. Please visit the mining section of Litecoin Forums and the litecoinmining subreddit for more indepth info.
Mining Software
Now that you have assembled your hardware now you need to get into a pool. But before you do that you need a mining software. There are many different ones but the one that is most popular is cgminer. Download it and make sure you read the README. It is a very robust piece of software. Please read this if you want to know more. (thanks BalzOnYer4Head)
Mining Pools
Now that your hardware and software is ready. I know nothing about solo mining other than the fact that you have to be very lucky and respectable amount of hashing power to decrypt a block. So it is better to join pools. I have been pool hopping for a bit and really liked give-me-coin previously known to the community as give-me-ltc. They have a nice mobile app and 0% pool fees. This is really a personal preference. Take a look at this list and try some yourself.
How do I connect to a pool?
Most pools will give you a tutorial on how to but the basics are as follows:
  • Signup for a pool
  • Create a worker for your account. Usually one worker per rig (Yes people have multiple rigs) is generally a good idea.
  • Create a .run file. Open up notepad and type cgminer.exe -o (address_to_the_miningpool:port_number) -u (yourusername.workername) -p (your_worker_password_if_you_made_one). Then File>Save As>runcgminer.run (Make sure the drop down is set to "All Files" and .txt document.) and save in the same folder as cgminer. That's it.
  • Double click on runcgminer.run (or whatever you named it) and have fun mining.
Mining Profitability
This game is not easy. If it was, practically everyone would be doing it. This is strictly a numbers game and there are calculations available that can help you determine your risk on your investments. 4 variables you need to consider when you are starting to mine:
Hardware cost: The cost of your physical hardware to run this whole operation.
Power: Measured in $/KwH is also known as the operating cost.
Difficulty rate: To put it in layman's terms the increase in difficulty is inversely proportional to amount of coin you can mine. The harder the difficulty the harder it is to mine coin. Right now difficulty is rising at about 18% per 3 days. This can and will change since all you miners are soon going to jump on the band wagon.
Your sanity: I am not going to tell you to keep calm and chive on because quiet frankly that is stupid. What I will tell you not to get too carried away. You will pull you hair out. Seriously.
Next thing you will need is a simple tool. A mining profitability calculator. I have two favourite ones.
coinwarz
I like this one cause it is simple. The fields are self explanatory. Try it.
bitcoinwisdom
I like this one because it is a more real life scenario calculator and more complicated one (not really). It also takes increasing difficulty into account.
Please note: This is the absolute basic info you need. If you have more questions feel free to ask and or google it!
More Below.
submitted by craeyon to litecoin [link] [comments]

Decred Journal – September 2018

Note: you can read this on GitHub (link), Medium (link) or old Reddit (link).

Development

Final version 1.3.0 of the core software was released bringing all the enhancements reported last month to the rest of the community. The groundwork for SPV (simplified payment verification) is complete, another reduction of fees is being deployed, and performance stepped up once again with a 50% reduction in startup time, 20% increased sync speed and more than 3x faster peer delivery of block headers (a key update for SPV). Decrediton's integrations of SPV and Politeia are open for testing by experienced users. Read the full release notes and get the downloads on GitHub. As always, don't forget to verify signatures.
dcrd: completed several steps towards multipeer downloads, improved introduction to the software in the main README, continued porting cleanups and refactoring from upstream btcd.
Currently in review are initial release of smart fee estimator and a change to UTXO set semantics. The latter is a large and important change that provides simpler handling, and resolves various issues with the previous approach. A lot of testing and careful review is needed so help is welcome.
Educational series for new Decred developers by @matheusd added two episodes: 02 Simnet Setup shows how to automate simnet management with tmux and 03 Miner Reward Invalidation explains block validity rules.
Finally, a pull request template with a list of checks was added to help guide the contributors to dcrd.
dcrwallet: bugfixes and RPC improvements to support desktop and mobile wallets.
Developers are welcome to comment on this idea to derive stakepool keys from the HD wallet seed. This would eliminate the need to backup and restore redeem scripts, thus greatly improving wallet UX. (missed in July issue)
Decrediton: bugfixes, refactoring to make the sync process more robust, new loading animations, design polishing.
Politeia: multiple improvements to the CLI client (security conscious users with more funds at risk might prefer CLI) and security hardening. A feature to deprecate or timeout proposals was identified as necessary for initial release and the work started. A privacy enhancement to not leak metadata of ticket holders was merged.
Android: update from @collins: "Second test release for dcrandroid is out. Major bugs have been fixed since last test. Latest code from SPV sync has been integrated. Once again, bug reports are welcome and issues can be opened on GitHub". Ask in #dev room for the APK to join testing.
A new security page was added that allows one to validate addresses and to sign/verify messages, similar to Decrediton's Security Center. Work on translations is beginning.
Overall the app is quite stable and accepting more testers. Next milestone is getting the test app on the app store.
iOS: the app started accepting testers last week. @macsleven: "the test version of Decred Wallet for iOS is available, we have a link for installing the app but the builds currently require your UDID. Contact either @macsleven or @raedah with your UDID if you would like to help test.".
Nearest goal is to make the app crash free.
Both mobile apps received new design themes.
dcrdata: v3.0 was released for mainnet! Highlights: charts, "merged debits" view, agendas page, Insight API support, side chain tracking, Go 1.11 support with module builds, numerous backend improvements. Full release notes here. This release featured 9 contributors and development lead @chappjc noted: "This collaboration with @raedahgroup on our own block explorer and web API for @decredproject has been super productive.".
Up next is supporting dynamic page widths site wide and deploying new visual blocks home page.
Trezor: proof of concept implementation for Trezor Model T firmware is in the works (previous work was for Model One).
Ticket splitting: updated to use Go modules and added simnet support, several fixes.
docs: beginner's guide overhaul, multiple fixes and cleanups.
decred.org: added 3rd party wallets, removed inactive PoW pools and removed web wallet.
@Richard-Red is building a curated list of Decred-related GitHub repositories.
Welcome to new people contributing for the first time: @klebe, @s_ben, @victorguedes, and PrimeDominus!
Dev activity stats for September: 219 active PRs, 197 commits, 28.7k added and 18.8k deleted lines spread across 6 repositories. Contributions came from 4-10 developers per repository. (chart)

Network

Hashrate: started and ended the month around 75 PH/s, hitting a low of 60.5 and a new high of 110 PH/s. BeePool is again the leader with their share varying between 23-54%, followed by F2Pool 13-30%, Coinmine 4-6% and Luxor 3-5%. As in previous months, there were multiple spikes of unidentified hashrate.
Staking: 30-day average ticket price is 98 DCR (+2.4). The price varied between 95.7 and 101.9 DCR. Locked DCR amount was 3.86-3.96 million DCR, or 45.7-46.5% of the supply.
Nodes: there are 201 public listening nodes and 325 normal nodes per dcred.eu. Version distribution: 5% are v1.4.0(pre) dev builds (+3%), 30% on v1.3.0 (+25%), 42% on v1.2.0 (-20%), 15% on v1.1.2 (-7%), 6% on v1.1.0. More than 76% of nodes run v1.2.0 and higher and therefore support client filters. Data as of Oct 1.

ASICs

Obelisk posted two updates on their mailing list. 70% of Batch 1 units are shipped, an extensive user guide is available, Obelisk Scanner application was released that allows one to automatically update firmware. First firmware update was released and bumped SC1 hashrate by 10-20%, added new pools and fixed multiple bugs. Next update will focus on DCR1. It is worth a special mention that the firmware source code is now open! Let us hope more manufacturers will follow this example.
A few details about Whatsminer surfaced this month. The manufacturer is MicroBT, also known as Bitwei and commonly misspelled as Bitewei. Pangolinminer is a reseller, and the model name is Whatsminer D1.
Bitmain has finally entered Decred ASIC space with their Antminer DR3. Hash rate is 7.8 TH/s while pulling 1410 W, at the price of $673. These specs mean it has the best GH/W and GH/USD of currently sold miners until the Whatsminer or others come out, although its GH/USD of 11.6 already competes with Whatsminer's 10.5. Discussed on Reddit and bitcointalk, unboxing video here.

Integrations

Meet our 17th voting service provider: decredvoting.com. It is operated by @david, has 2% fee and supports ticket splitting. Reddit thread is here.
For a historical note, the first VSP to support ticket splitting was decredbrasil.com:
@matheusd started tests on testnet several months ago. I contacted him so we could integrate with the pool in June this year. We set up the machine in July and bought the first split ticket on mainnet, using the decredbrasil pool, on July 19. It was voted on July 30. After this first vote on mainnet, we opened the tests to selected users (with more technical background) on the pool. In August we opened the tests to everyone, and would call people who want to join to the #ticket_splitting channel, or to our own Slack (in Portuguese, so mostly Brazilian users). We have 28 split tickets already voted, and 16 are live. So little more than 40 split tickets total were bought on decredbrasil pool. (@girino in #pos-voting)
KuCoin exchange listed DCBTC and DCETH pairs. To celebrate their anniversary they had a 99% trading fees discount on DCR pairs for 2 weeks.
Three more wallets integrated Decred in September:
ChangeNow announced Decred addition to their Android app that allows accountless swaps between 150+ assets.
Coinbase launched informational asset pages for top 50 coins by market cap, including Decred. First the pages started showing in the Coinbase app for a small group of testers, and later the web price dashboard went live.

Adoption

The birth of a Brazilian girl was registered on the Decred blockchain using OriginalMy, a blockchain proof of authenticity services provider. Read the full story in Portuguese and in English.

Marketing

Advertising report for September is ready. Next month the graphics for all the ads will be changing.
Marketing might seem quiet right now, but a ton is actually going on behind the scenes to put the right foundation in place for the future. Discovery data are being analyzed to generate a positioning strategy, as well as a messaging hierarchy that can guide how to talk about Decred. This will all be agreed upon via consensus of the community in the work channels, and materials will be distributed.
Next, work is being done to identify the right PR partner to help with media relations, media training, and coordination at events. While all of this is coming up to speed, we believe the website needs a refresher reflecting the soon to be agreed upon messaging, plus a more intuitive architecture to make it easier to navigate. (@Dustorf)

Events

Attended:
Upcoming:
We'll begin shortly reviewing conferences and events planned for the first half of 2019. Highlights are sure to include The North American Bitcoin Conference in Miami (Jan 16-18) and Consensus in NYC (May 14-16). If you have suggestions of events or conferences Decred should attend, please share them in #event_planning. In 2019, we would like to expand our presence in Europe, Asia, and South America, and we're looking for community members to help identify and staff those events. (@Dustorf)

Media

August issue of Decred Journal was translated to Russian. Many thanks to @DZ!
Rency cryptocurrency ratings published a report on Decred and incorporated a lot of feedback from the community on Reddit.
September issue of Chinese CCID ratings was published (snapshot), Decred is still at the bottom.
Videos:
Featured articles:
Articles:

Community Discussions

Community stats:
Comm systems news: Several work channels were migrated to Matrix, #writers_room is finally bridged.
Highlights:
Twitter: why decentralized governance and funding are necessary for network survival and the power of controlling the narrative; learning about governance more broadly by watching its evolution in cryptocurrency space, importance of community consensus and communications infrastructure.
Reddit: yet another strong pitch by @solar; question about buyer protections; dcrtime internals; a proposal to sponsor hoodies in the University of Cape Town; Lightning Network support for altcoins.
Chats: skills to operate a stakepool; voting details: 2 of 3 votes can approve a block, what votes really approve are regular tx, etc; scriptless script atomic swaps using Schnorr adaptor signatures; dev dashboard, choosing work, people do best when working on what interests them most; opportunities for governments and enterprise for anchoring legal data to blockchain; terminology: DAO vs DAE; human-friendly payments, sharing xpub vs payment protocols; funding btcsuite development; Politeia vote types: approval vote, sentiment vote and a defund vote, also linking proposals and financial statements; algo trading and programming languages (yes, on #trading!); alternative implementation, C/C++/Go/Rust; HFTs, algo trading, fake volume and slippage; offline wallets, usb/write-only media/optical scanners vs auditing traffic between dcrd and dcrwallet; Proof of Activity did not inspire Decred but spurred Decred to get moving, Wikipedia page hurdles; how stakeholders could veto blocks; how many votes are needed to approve a proposal; why Decrediton uses Electron; CVE-2018-17144 and over-dependence on single Bitcoin implementation, btcsuite, fuzz testing; tracking proposal progress after voting and funding; why the wallet does not store the seed at all; power connectors, electricity, wiring and fire safety; reasonable spendings from project fund; ways to measure sync progress better than block height; using Politeia without email address; concurrency in Go, locks vs channels.
#support is not often mentioned, but it must be noted that every day on this channel people get high quality support. (@bee: To my surprise, even those poor souls running Windows 10. My greatest respect to the support team!)

Markets

In September DCR was trading in the range of USD 34-45 / BTC 0.0054-0.0063. On Sep 6, DCR revisited the bottom of USD 34 / BTC 0.0054 when BTC quickly dropped from USD 7,300 to 6,400. On Sep 14, a small price rise coincided with both the start of KuCoin trading and hashrate spike to 104 PH/s. Looking at coinmarketcap charts, the trading volume is a bit lower than in July and August.
As of Oct 4, Decred is #18 by the number of daily transactions with 3,200 tx, and #9 by the USD value of daily issuance with $230k. (source: onchainfx)
Interesting observation by @ImacallyouJawdy: while we sit at 2018 price lows the amount locked in tickets is testing 2018 high.

Relevant External

ASIC for Lyra2REv2 was spotted on the web. Vertcoin team is preparing a new PoW algorithm. This would be the 3rd fork after two previous forks to change the algorithm in 2014 and 2015.
A report titled The Positive Externalities of Bitcoin Mining discusses the benefits of PoW mining that are often overlooked by the critics of its energy use.
A Brief Study of Cryptonetwork Forks by Alex Evans of Placeholder studies the behavior of users, developers and miners after the fork, and makes the cases that it is hard for child chains to attract users and developers from their parent chains.
New research on private atomic swaps: the paper "Anonymous Atomic Swaps Using Homomorphic Hashing" attempts to break the public link between two transactions. (bitcointalk, decred)
On Sep 18 Poloniex announced delisting of 8 more assets. That day they took a 12-80% dive showing their dependence on this one exchange.
Circle introduced USDC markets on Poloniex: "USDC is a fully collateralized US dollar stablecoin using the ERC-20 standard that provides detailed financial and operational transparency, operates within the regulated framework of US money transmission laws, and is reinforced by established banking partners and auditors.".
Coinbase announced new asset listing process and is accepting submissions on their listing portal. (decred)
The New York State Office of the Attorney General posted a study of 13 exchanges that contains many insights.
A critical vulnerability was discovered and fixed in Bitcoin Core. Few days later a full disclosure was posted revealing the severity of the bug. In a bitcointalk thread btcd was called 'amateur' despite not being vulnerable, and some Core developers voiced their concerns about multiple implementations. The Bitcoin Unlimited developer who found the bug shared his perspective in a blog post. Decred's vision so far is that more full node implementations is a strength, just like for any Internet protocol.

About This Issue

This is the 6th issue of Decred Journal. It is mirrored on GitHub, Medium and Reddit. Past issues are available here.
Most information from third parties is relayed directly from source after a minimal sanity check. The authors of Decred Journal have no ability to verify all claims. Please beware of scams and do your own research.
Feedback is appreciated: please comment on Reddit, GitHub or #writers_room on Matrix or Slack.
Contributions are also welcome: some areas are adding content, pre-release review or translations to other languages.
Credits (Slack names, alphabetical order): bee, Dustorf, jz, Haon, oregonisaac, raedah and Richard-Red.
submitted by jet_user to decred [link] [comments]

How To Start [ASIC Bitcoin Mining] Bi Fury USB Bitcoin miner asic 5gh/s showcase Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the Jalapeno Part 1 Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the ... T4D #84 - Pt 2 Bitcoin Mining, BFL ASIC vs FPGA vs GPU vs CPU

Live income estimation of all known ASIC miners, updated every minute. ASIC Miner Value ... 32.5 Gh/s. 750 W. 75 db. X11-$1.82 /day. StrongU STU-U8. Jul 2019. 46 Th/s. 2100 W. 76 db. SHA-256-$1.89 /day. ASICminer 8 Nano S 58Th. Dec 2019. 58 Th/s. 2500 W. 47 db. SHA-256-$1.96 /day. ASICminer 8 Nano 44Th. Oct 2018. 44 Th/s. 2100 W. 47 db. SHA-256-$2.07 /day. Bitmain Antminer S17 (53Th) Apr 2019 ... Once again, it was Butterfly Labs who announced ASIC hardware as one of the first. To be more specific, the company announced one 60 GH/s miner and one 4.5 GH/s miner. However, the company tried ... See also: Non-specialized hardware comparison Below are statistics about the Bitcoin Mining performance of ASIC hardware and only includes specialized equipment that has been shipped.. GPUs, CPUs and other hardware not specifically designed for Bitcoin mining can be found in the Non-specialized_hardware_comparison.. Notes: BitFury – BitFury is one of the largest producers of Bitcoin mining hardware and chips. Its hardware is not available for purchase. Bitcoin Mining Equipment. In addition to a Bitcoin mining ASIC, you’ll need some other Bitcoin mining equipment: Power Supply – Bitcoin rigs need special power supplies to funnel and use electricity efficiently. Furthermore, Bitcoin ASIC technology keeps getting faster, more efficient and more productive so it keeps pushing the limits of what makes the best Bitcoin mining hardware. Some models of Bitcoin miners include Antminer S5, Antminer U3, ASICMiner BE Tube, ASICMiner BE Prisma, Avalon 2, Avalon 3, BTC Garden AM-V1 616 GH/s, VMC PLATINUM 6 MODULE, and USB miners .

[index] [28963] [38448] [13349] [50787] [50536] [24555] [24964] [2880] [1127] [38955]

How To Start [ASIC Bitcoin Mining]

Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the Jalapeno Part 2 - Duration: 8:16. ... DIY Bitcoin Mining: Hardware (part1) - Duration: 7:45. Fred Yen 1,596,741 views. 7:45. T4D #84 - Pt 2 ... In this video I take a look at Bitcoin mining hardware. I compare the performance and power usage between BFL SC ASIC vs FPGA vs GPU (Nvideo GTX 560 Ti and AMD ATI Radeon HD 8950) vs CPU (Intel ... This is an unboxing and first impression of my recently delivered Butterfly Labs Jalapeno 5GH/s ASIC Bitcoin Miner. I may do a video on how to set this up and possibly use it for merged mining. BITCOIN Mining in 2019 - ASIC USB Miner - Does it make Sense ? - Duration: 11:28. ... How to setup USB Asic Miner Red Fury bitcoin miner 2.2~2.7 GH/s with cgminer - Duration: 5:53. Eyeboot 65,319 ... DIY Bitcoin Mining: Hardware (part1) - Duration: 7:45. Fred Yen 1,599,795 views. 7:45. How to setup USB Asic Miner Red Fury bitcoin miner 2.2~2.7 GH/s with cgminer - Duration: 5:53. ...

#